modified on 10 October 2008 at 14:22 ••• 57,569 views

PPPOE Server

From MikroTik Wiki

Jump to: navigation, search

you can use this configuration for PPPoe server that users get public ip. if range of public ip is 192.168.1.0/24 and ip of router is 192.168.1.4 and ip of gateway is 192.168.1.1 first for router set this ip

PPPoe-ip.jpg


then write 1 route for describe gateway:

PPPoe-route.jpg

NOTE: is better in interface change ARP condition to proxy-arp

Pppoe-arp.jpg

then for user you can provide ip. we provide 245 ip for users in IP>POOL:

Pppoe-pool.jpg

if pppoe setup over other ethernet port like LOCAL

Pppoe-local.jpg

now for setup PPPOE server look for PPP and in Profiles and click on add bottom:

Pppoe-profile.jpg

well now router for made PPPoE server is ready in PPP click PPPoE servers tab and click add bottom:

PPPoe-server.jpg

for make username and passoword in light scale in Secrets tab in PPP click on add bottom :

Pppoe-secret.jpg

for better manage on users traffic you can apply radius server and for bandwidth use queue.