View source for Manual:MPLS/Traffic-eng

{{Versions|v3, v4}}

<div class=manual>

<h2>Summary</h2>
<p>
</p>

<h2>Interface</h2>
<p><b>Sub-menu:</b> <code>/mpls traffic-eng interface</code></p>


<b>Properties:</b>
{{Mr-arg-table-h
|prop=Property
|desc=Description
}}

{{Mr-arg-table
|arg=bandwidth
|type=integer[bps]
|default=0bps
|desc=Total bandwidth that can be allocated on an interface by TE tunnels.
}}

{{Mr-arg-table
|arg=blockade-k-factor
|type=integer
|default=3
|desc=
}}

{{Mr-arg-table
|arg=comment
|type=string
|default=
|desc=Short description of the item
}}

{{Mr-arg-table
|arg=disabled
|type=<nowiki>yes | no</nowiki>
|default=yes
|desc=Defines whether item is ignored or used. By default VPLS interface is disabled.
}}

{{Mr-arg-table
|arg=down-flood-thresholds
|type=integer[0..100],interer[0..100],...
|default=15,30,45,60,75,80,85,90,95,97,98,99,100
|desc=
}}

{{Mr-arg-table
|arg=igp-flood-period
|type=time
|default=3m
|desc=
}}

{{Mr-arg-table
|arg=interface
|type=string
|default=
|desc=Name of an interface on which to run RSVP.
}}

{{Mr-arg-table
|arg=k-factor
|type=integer
|default=3
|desc=Value used to calculate RSVP timeout. [[M:TE_Tunnels_Example | <code>Read more >></code>]]
}}

{{Mr-arg-table
|arg=refresh-time
|type=time
|default=30s
|desc=Interval in which RSVP Path messages are sent out.
}}

{{Mr-arg-table
|arg=resource-class
|type=integer[0..FFFFFFFF]
|default=0
|desc=
}}

{{Mr-arg-table
|arg=te-metric
|type=integer
|default=1
|desc=
}}

{{Mr-arg-table
|arg=up-flood-thresholds
|type=integer[0..100],interer[0..100],...
|default=15,30,45,60,75,80,85,90,95,97,98,99,100
|desc=
}}

{{Mr-arg-table
|arg=use-udp
|type=<nowiki>yes | no</nowiki>
|default=no
|desc=
}}
</table>


<b>Read-only properties:</b>
{{Mr-arg-table-h
|prop=Property
|desc=Description
}}

{{Mr-arg-ro-table
|arg=remaining-bw
|type=integer[bps]
|desc=Shows currently unallocated bandwidth.
}}
</table>

<h2>Tunnel Path</h2>
<p><b>Sub-menu:</b> <code>/mpls traffic-eng tunnel-path</code></p>

<b>Properties:</b>
{{Mr-arg-table-h
|prop=Property
|desc=Description
}}

{{Mr-arg-table
|arg=affinity-exclude
|type=integer
|default=
|desc=Do not use the path if [[#Interface | <code>resource-class</code>]] matches any of specified bits.
}}

{{Mr-arg-table
|arg=affinity-include-all
|type=integer
|default=
|desc=Use the path only if [[#Interface | <code>resource-class</code>]] matches all of specified bits.
}}

{{Mr-arg-table
|arg=affinity-include-any
|type=integer
|default=
|desc=Use the path if [[#Interface | <code>resource-class</code>]] matches any of specified bits.
}}

{{Mr-arg-table
|arg=comment
|type=string
|default=
|desc=Short description of the item
}}

{{Mr-arg-table
|arg=disabled
|type=<nowiki>yes | no</nowiki>
|default=yes
|desc=Defines whether item is ignored or used. By default VPLS interface is disabled.
}}

{{Mr-arg-table
|arg=holding-priority
|type=integer[0..7]
|default=
|desc=Is used to decide whether this path can be preempted by another path. 0 sets the highest priority.
}}

{{Mr-arg-table
|arg=hops
|type=Address:[strict|loose] [, Address:[strinct|loose]]
|default=
|desc=List of hops that path traverses. Used if <code>use-cspf</code> is not enabled. It is possible to specify <b>strict</b> hop or <b>loose</b> hop:
<ul class="bullets">
<li> <var>strict</var> - defines that there must not be any other hops between previous hop and "strict" hop (fully specified path). 
<li> <var>loose</var> - there are acceptable other hops between previous hop and defined hop (not fully specified path).
</ul>
[[M:Static TE tunnel path | <code>Read more >></code>]] 
}}

{{Mr-arg-table
|arg=name
|type=string
|default=
|desc=Descriptive name of tunnel path
}}

{{Mr-arg-table
|arg=record-route
|type=<nowiki>yes | no</nowiki>
|default=
|desc=Defines whether to record routes along the path.
}}

{{Mr-arg-table
|arg=reoptimize-interval
|type=time
|default=
|desc=Interval in which tunnel path will be re-optimized. Useful if <code>use-cspf</code> is set to <b>yes</b>. 
}}

{{Mr-arg-table
|arg=setup-priority
|type=integer[0..7]
|default=
|desc=Parameter is used to decide whether this path can preempt another path. 0 sets the highest priority.
}}

{{Mr-arg-table
|arg=use-cspf
|type=<nowiki>yes | no</nowiki>
|default=yes
|desc=Whether to use [[CSPF]] to create dynamic tunnel path.
}}
</table>

<h2>Monitoring TE Status</h2>

<h3>Path State</h3>
<p><b>Sub-menu:</b> <code>/mpls traffic-eng path-state</code></p>

<p>
</p>

Available read only properties:
{{Mr-arg-table-h
|prop=Property
|desc=Description
}}

{{Mr-arg-ro-table
|arg=bandwidth
|type=integer[bps]
|desc=Bandwidth required for the path
}}

{{Mr-arg-ro-table
|arg=dst
|type=address:integer
|desc=Shows TE path destination address and tunnel ID.
}}

{{Mr-arg-ro-table
|arg=egress
|type=<nowiki>yes | no</nowiki>
|desc=Shows if router is egress router of the path
}}

{{Mr-arg-ro-table
|arg=forwarding
|type=<nowiki>yes | no</nowiki>
|desc=Shows if router is forwarding router of the path
}}

{{Mr-arg-ro-table
|arg=in-interface
|type=string
|desc=
}}

{{Mr-arg-ro-table
|arg=in-previous-hop
|type=IP
|desc=Recorded previous hop
}}

{{Mr-arg-ro-table
|arg=label
|type=integer
|desc=
}}

{{Mr-arg-ro-table
|arg=locally-originated
|type=<nowiki>yes | no</nowiki>
|desc=Shows if router is ingress router of the path
}}

{{Mr-arg-ro-table
|arg=out-interface
|type=string
|desc=
}}

{{Mr-arg-ro-table
|arg=out-label
|type=integer
|desc=
}}

{{Mr-arg-ro-table
|arg=out-next-hop
|type=IP
|desc=
}}

{{Mr-arg-ro-table
|arg=path-in-explicit-route
|type=
|desc=
}}

{{Mr-arg-ro-table
|arg=path-in-record-route
|type=List of IPs
|desc=Received recorded routes along the path.
}}

{{Mr-arg-ro-table
|arg=path-out-explicit-route
|type=
|desc=
}}

{{Mr-arg-ro-table
|arg=path-out-record-route
|type=
|desc=List of recorded routes along the path that is sent out to next hop.
}}

{{Mr-arg-ro-table
|arg=resv-bandwidth
|type=integer[bps]
|desc=bandwidth that TE path is reserving.
}}

{{Mr-arg-ro-table
|arg=resv-out-record-route
|type=
|desc=
}}

{{Mr-arg-ro-table
|arg=sending-path
|type=<nowiki>yes | no</nowiki>
|desc=
}}

{{Mr-arg-ro-table
|arg=sending-resv
|type=<nowiki>yes | no</nowiki>
|desc=
}}

{{Mr-arg-ro-table
|arg=src
|type=Address:ID
|desc=Shows source address and LSP ID number
}}
</table>

<h3>Resv State</h3>
<p><b>Sub-menu:</b> <code>/mpls traffic-eng resv-state</code></p>

<p>
</p>

Available read only properties:
{{Mr-arg-table-h
|prop=Property
|desc=Description
}}

{{Mr-arg-ro-table
|arg=active
|type=<nowiki>yes | no</nowiki>
|desc=
}}

{{Mr-arg-ro-table
|arg=bandwidth
|type=integer[bps]
|desc=Bandwidth that RSVP session is allocating.
}}

{{Mr-arg-ro-table
|arg=dst
|type=address:ID
|desc=Shows TE destination address and tunnel ID from RSVP session.
}}

{{Mr-arg-ro-table
|arg=egress
|type=<nowiki>yes | no</nowiki>
|desc=Shows if router is egress router of the path
}}

{{Mr-arg-ro-table
|arg=interface
|type=string
|desc=Shows an interface on which bandwidth is reserved
}}

{{Mr-arg-ro-table
|arg=label
|type=integer
|desc=
}}

{{Mr-arg-ro-table
|arg=next-hop
|type=
|desc=
}}

{{Mr-arg-ro-table
|arg=non-output
|type=<nowiki>yes | no</nowiki>
|desc=
}}

{{Mr-arg-ro-table
|arg=recorded-route
|type=IP[label]
|desc=Shows recorded routes and labels along LSP.
}}

{{Mr-arg-ro-table
|arg=shared
|type=<nowiki>yes | no</nowiki>
|desc=
}}

{{Mr-arg-ro-table
|arg=src
|type=address:ID
|desc=Shows TE source address and LSP ID from RSVP session.
}}
</table>

<h2>See also</h2>
<ul class="bullets">
<li> [[M:MPLSVPLS|MPLSVPLS]]
<li> [[M:BGP_based_VPLS | BGP based VPLS]]
<li> [[M:Cisco_VPLS | Cisco style BGP based VPLS]]
</ul>
</div>

{{Cont}}

[[Category:Manual]]
[[Category:MPLS]]
[[Category:Internetworking]]
[[Category:QoS]]