IPv6 pools are used to define range of IPv6 addresses that is used for DHCPv6 server and Point-to-Point servers
IPv6 pools simply group IPv6 addresses for further usage. It is a single configuration point for all features that assign IPv6 addresses to clients.
Pool Configuration
Property
Description
name (string; Default: )
Descriptive name of the pool.
prefix (IPv6/0..128; Default: )
Ipv6 address prefix
prefix-length (integer [1..128]; Default: )
Option represents the prefix size that will be give out to the client.
Read-only properties
Property
Description
dynamic (yes | no)
Whether pool is dynamic.
id (integer)
expire-time (time)
Expire time is set to dynamic pools added by DHCPv6 client.
Example
Define a pool named "test" with prefix "2001::/64":
[admin@test-host] /ipv6 pool> add
name: test
prefix: 2001::/60
prefix-length: 62
[admin@test-host] /ipv6 pool> print
# NAME PREFIX PREFIX-LENGTH
0 test 2001::/60 62bits
[admin@test-host] /ipv6 pool>
Used Addresses from Pool
Sub-menu:/ipv6 pool used
In this menu you can see all used IPv6 addresses from the pools.
All properties are read-only.
Property
Description
info (string)
Shows DUID related information. For example if info="ether/00:24:1D:17:81:F7 4e71d294" , it means that client sent DUID-LLT with ethernet mac address and timestamp (last part is raw timestamp in hex).
owner (string)
What reserved the prefix ("DHCP", etc.)
pool (string)
Name of the pool.
prefix (IPv6/0..128)
IPv6 prefix that is assigned to client form the pool.
