Manual:Wireless card diagnostics: Difference between revisions
No edit summary |
No edit summary |
||
| (5 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
== R52, R52Hn and R52H Power Amplifier damage == | |||
If the cards are becoming too hot to touch, when inserted in a RouterBOARD, but are disabled - the PA might be damaged. This could be caused by user, or by manufacturing problem. To determine, must return to RMA for close inspection. | |||
== R52, R52Hn and R52H ESD damage == | |||
Improper grounding can cause ESD damage to wireless cards during storms or other ESD situations. To test if your R52 or R52H card is malfunctioning due to lightning/storm electrostatic damage, use a multimeter. In case the test fails with this method, the warranty doesn't cover it: | |||
Damaged card: | Damaged card: | ||
[[File:Storm1.jpg|800px]] | [[File:Storm1.jpg|800px]] | ||
Normal card: | Normal card: | ||
| Line 19: | Line 19: | ||
[[Image:Storm3.jpg|800px]] | [[Image:Storm3.jpg|800px]] | ||
R52Hn card chain 0: | |||
[[File:DSC0634.jpg|800px]] | |||
R52Hn chain 1: | |||
[[File:DSC0633.jpg|800px]] | |||
== R52n antenna circuit damage test == | |||
These images show how to test for antenna circuit damage. If the resistance between shown points is lower than infinity (shown as OL on multimeter), the card is damaged by lightning, and the damage will not be repaired by warranty (don't send to RMA). | |||
This chain is damaged: | |||
[[File:Dz1.jpg]] | |||
This chain is OK: | |||
[[File:Dz2.jpg]] | |||
Close-up of testing area: | |||
[[File:Dz3.jpg]] | |||
== DC shorted antennas == | == DC shorted antennas == | ||
| Line 28: | Line 51: | ||
[[File:Dc grounded.jpg|DC shorted antenna]] | [[File:Dc grounded.jpg|DC shorted antenna]] | ||
NOT DC shorted antenna. This antenna needs a Coax lightning arrestor to avoid sudden wireless card damage. Note the OL ( | NOT DC shorted antenna. This antenna needs a Coax lightning arrestor to avoid sudden wireless card damage. Note the OL (Open Loop) in the multimeter: | ||
[[File:Dc notgrounded.jpg|DC NOT shorted antenna]] | [[File:Dc notgrounded.jpg|DC NOT shorted antenna]] | ||
[[Category: | [[Category:Wireless]] | ||
[[Category: | [[Category:Case Studies]] | ||
[[Category: | [[Category:Hardware]] | ||
[[Category: | [[Category:Routerboard]] | ||
Latest revision as of 16:13, 20 April 2018
R52, R52Hn and R52H Power Amplifier damage
If the cards are becoming too hot to touch, when inserted in a RouterBOARD, but are disabled - the PA might be damaged. This could be caused by user, or by manufacturing problem. To determine, must return to RMA for close inspection.
R52, R52Hn and R52H ESD damage
Improper grounding can cause ESD damage to wireless cards during storms or other ESD situations. To test if your R52 or R52H card is malfunctioning due to lightning/storm electrostatic damage, use a multimeter. In case the test fails with this method, the warranty doesn't cover it:
Damaged card:
Normal card:
Testing area close-up:
R52Hn card chain 0:
R52Hn chain 1:
R52n antenna circuit damage test
These images show how to test for antenna circuit damage. If the resistance between shown points is lower than infinity (shown as OL on multimeter), the card is damaged by lightning, and the damage will not be repaired by warranty (don't send to RMA).
This chain is damaged:
This chain is OK:
Close-up of testing area:
DC shorted antennas
Also make sure that your antenna is DC shorted:
DC shorted antenna. This antenna doesn't need a Coax lightning arrestor:
NOT DC shorted antenna. This antenna needs a Coax lightning arrestor to avoid sudden wireless card damage. Note the OL (Open Loop) in the multimeter:
