Manual:IPv6/Pool: Difference between revisions
Jump to navigation
Jump to search
| (3 intermediate revisions by the same user not shown) | |||
| Line 47: | Line 47: | ||
}} | }} | ||
'''Read-only properties''' | |||
{{Mr-arg-table-h | |||
|prop=Property | |||
|desc=Description | |||
}} | |||
{{Mr-arg-ro-table | |||
|arg=dynamic | |||
|type=yes {{!}} no | |||
|desc=Whether pool is dynamic. | |||
}} | |||
{{Mr-arg-ro-table | |||
|arg=id | |||
|type=integer | |||
|desc= | |||
}} | |||
{{Mr-arg-ro-table-end | |||
|arg=expire-time | |||
|type=time | |||
|desc=Expire time is set to dynamic pools added by [[M:IPv6/DHCP_Client | DHCPv6 client]]. | |||
}} | |||
===Example=== | ===Example=== | ||
Example will create a pool of "2001::/60" to give out /62 prefixes: | |||
<pre> | <pre> | ||
| Line 80: | Line 107: | ||
|arg=info | |arg=info | ||
|type=string | |type=string | ||
|desc=Shows DUID related information | |desc=Shows DUID related information received from client (value in hex).Can contain also raw timestamp in hex. | ||
}} | }} | ||
Latest revision as of 07:10, 14 August 2018
Applies to RouterOS: v5.7+
Summary
Sub-menu: /ipv6 pool
Standards:
Package : IPv6
IPv6 pools are used to define range of IPv6 addresses that is used for DHCPv6 server and Point-to-Point servers
IPv6 pools simply group IPv6 addresses for further usage. It is a single configuration point for all features that assign IPv6 addresses to clients.
Pool Configuration
| Property | Description |
|---|---|
| name (string; Default: ) | Descriptive name of the pool. |
| prefix (IPv6/0..128; Default: ) | Ipv6 address prefix |
| prefix-length (integer [1..128]; Default: ) | Option represents the prefix size that will be give out to the client. |
Read-only properties
| Property | Description |
|---|---|
| dynamic (yes | no) | Whether pool is dynamic. |
| id (integer) | |
| expire-time (time) | Expire time is set to dynamic pools added by DHCPv6 client. |
Example
Example will create a pool of "2001::/60" to give out /62 prefixes:
[admin@test-host] /ipv6 pool> add name: test prefix: 2001::/60 prefix-length: 62 [admin@test-host] /ipv6 pool> print # NAME PREFIX PREFIX-LENGTH 0 test 2001::/60 62bits [admin@test-host] /ipv6 pool>
Used Addresses from Pool
Sub-menu: /ipv6 pool used
In this menu you can see all used IPv6 addresses from the pools.
All properties are read-only.
| Property | Description |
|---|---|
| info (string) | Shows DUID related information received from client (value in hex).Can contain also raw timestamp in hex. |
| owner (string) | What reserved the prefix ("DHCP", etc.) |
| pool (string) | Name of the pool. |
| prefix (IPv6/0..128) | IPv6 prefix that is assigned to client form the pool. |
[ Top | Back to Content ]