Manual:IP/Pools: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
← Older edit
No edit summary
 
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Versions|2.9, v3, v4 +}}
__TOC__
<div class="manual">
IP pools are used to define range of IP addresses that is used for DHCP server and Point-to-Point servers
IP pools are used to define range of IP addresses that is used for DHCP server and Point-to-Point servers


Line 13: Line 18:
IP pools simply group IP addresses for further usage. It is a single configuration point for all features that assign IP addresses to clients.
IP pools simply group IP addresses for further usage. It is a single configuration point for all features that assign IP addresses to clients.


===Notes===
{{Note | Whenever possible, the same ip address is given out to each client (OWNER/INFO pair). }}
 
Whenever possible, the same ip address is given out to each client (OWNER/INFO pair).


==Setup==
==Setup==


* Submenu level: '''/ip pool'''
<p id="shbox"><b>Sub-menu:</b> <code>/ip pool</code></p>


===Property Description===
===Property Description===
Line 55: Line 58:


* '''address''' (read-only: IP address) - IP address that is assigned to client form the pool
* '''address''' (read-only: IP address) - IP address that is assigned to client form the pool
* '''info''' (read-only: name) - name of the interface to which the client is connected to
* '''info''' (read-only: name) - For DHCP MAC address from leases menu and for PPP connections username of PPP type client
* '''owner''' (read-only: MAC address) - MAC address of the client
* '''owner''' (read-only: MAC address) - Service which is using this IP address
* '''pool''' (read-only: name) - name of the IP pool
* '''pool''' (read-only: name) - name of the IP pool


Line 69: Line 72:
</pre>
</pre>


[[Category:Manual]]
</div>
 
{{cont}}
 
[[Category:Manual|Pool]]
[[Category:IP|Pool]]

Latest revision as of 10:26, 13 February 2019

Applies to RouterOS: 2.9, v3, v4 +

IP pools are used to define range of IP addresses that is used for DHCP server and Point-to-Point servers

Specifications

  • Packages required: system
  • License required: Level1
  • Submenu level: /ip pool
  • Standards and Technologies: none
  • Hardware usage: Not significant

Description

IP pools simply group IP addresses for further usage. It is a single configuration point for all features that assign IP addresses to clients.

Note: Whenever possible, the same ip address is given out to each client (OWNER/INFO pair).


Setup

Sub-menu: /ip pool

Property Description

  • name (name) - the name of the pool
  • next-pool (name) - when address is acquired from pool that has no free addresses, and next-pool property is set to another pool, then next IP address will be acquired from next-pool
  • ranges (IP address) - IP address list of non-overlapping IP address ranges in form of: from1-to1,from2-to2,...,fromN-toN. For example, 10.0.0.1-10.0.0.27,10.0.0.32-10.0.0.47

Example

To define a pool named ip-pool with the 10.0.0.1-10.0.0.125 address range excluding gateway's address 10.0.0.1 and server's address 10.0.0.100, and the other pool dhcp-pool, with the 10.0.0.200-10.0.0.250 address range: 

[admin@MikroTik] ip pool> add name=ip-pool ranges=10.0.0.2-10.0.0.99,10.0.0.101
10.0.0.126
[admin@MikroTik] ip pool> add name=dhcp-pool ranges=10.0.0.200-10.0.0.250
[admin@MikroTik] ip pool> print
  # NAME                                        RANGES
  0 ip-pool                                     10.0.0.2-10.0.0.99
                                                10.0.0.101-10.0.0.126
  1 dhcp-pool                                   10.0.0.200-10.0.0.250

[admin@MikroTik] ip pool>

Used Addresses from Pool

  • Submenu level: /ip pool used

Description

Here you can see all used IP addresses from IP pools.

Property Description

  • address (read-only: IP address) - IP address that is assigned to client form the pool
  • info (read-only: name) - For DHCP MAC address from leases menu and for PPP connections username of PPP type client
  • owner (read-only: MAC address) - Service which is using this IP address
  • pool (read-only: name) - name of the IP pool

Example

See used addresses from pool: 

[admin@MikroTik] ip pool used> print
POOL  ADDRESS         OWNER                        INFO
local 192.168.0.100   00:0C:42:03:1F:60            test
local 192.168.0.99    00:0C:42:03:21:0F            test

[ Top | Back to Content ]

Retrieved from "https://wiki.mikrotik.com/index.php?title=Manual:IP/Pools&oldid=32890"