Manual:Peripherals: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 27: | Line 27: | ||
|Yota LU150 | |Yota LU150 | ||
|v5.22 and v6.4 | |v5.22 and v6.4 | ||
|Some settings are ignored | |Some settings are ignored. | ||
|USB | |USB | ||
|? | |? | ||
Line 34: | Line 34: | ||
|Yota WLTUBA-107 | |Yota WLTUBA-107 | ||
|v6.0 | |v6.0 | ||
|Some settings are ignored | |Some settings are ignored. | ||
|USB | |USB | ||
|? | |? | ||
Line 41: | Line 41: | ||
|Yota wifi modem | |Yota wifi modem | ||
|v6.7 | |v6.7 | ||
|Some settings are ignored | |Some settings are ignored. | ||
|USB | |USB | ||
|? | |? |
Latest revision as of 13:04, 11 August 2023
Warning: This manual is moved to https://help.mikrotik.com/docs/display/ROS/Peripherals
This article describes supported add-on peripherals for RouterBOARD hardware devices.
Cellular modems
Model | Tested RouterOS version | Comments | Format | Passthrough support | Technologies |
---|---|---|---|---|---|
BandRich C501 | v5.25 and v6.0 | USB | ? | LTE | |
Sierra Wireless MC7710/MC7700/MC7750 | v5.25, v6.0 and 6.40RC43 |
If modem uses firmware 3.5 it should be upgraded to 3.5.23.2 firmware release in order to work in RouterOS correctly again. |
MiniPCI-e | N | LTE |
Yota LU150 | v5.22 and v6.4 | Some settings are ignored. | USB | ? | LTE |
Yota WLTUBA-107 | v6.0 | Some settings are ignored. | USB | ? | LTE |
Yota wifi modem | v6.7 | Some settings are ignored. | USB | ? | LTE |
Vodafone K4305 | v6.7 | Some settings are ignored. | USB | ? | LTE |
Android usb tethering interface | v6.7 | Some settings are ignored. | USB | ? | LTE |
ZTE MF823 | v6.8 | Some settings are ignored. For some devices it's needed to enter in FACTORY mode to change operating state. | USB | ? | LTE |
ZTE MF825A | v6.xx | Some settings are ignored. | USB | ? | LTE |
Vodafone K5160 | v6.37 | Some settings are ignored. | USB | ? | LTE |
Vodafone K4201-Z | v6.8 | Some settings are ignored. LTE interface. | USB | ? | LTE |
ZTE MF827 | v6.8 | Some settings are ignored. | USB | ? | LTE |
Huawei E3272 | v6.8 | Some settings are ignored. There are multiple versions of this modem. Looks like only modem with device-id="0x14db" works as LTE interface. | USB | ? | LTE |
Huawei E5377 | v6.36.1 | MIFI unit. No serial support, but works with IP on LTE interface | USB | ? | LTE |
Huawei MU609 | v6.11 | MiniPCI-e | ? | 3G | |
Huawei MU709s-2 | v6.28 | MiniPCI-e | Y | 3G | |
Huawei ME909u-521 | v6.11 | MiniPCI-e | N | LTE | |
Huawei ME909s-120 | v6.28 | Recommended modem firmware version 11.617.24.00.00 To reduce LTE interface IP subnet mask to /32 configure modem with at-chat command: /interface lte at-chat [find] input="AT^CUSTFEATURE=3,1" |
MiniPCI-e | Y | LTE |
SIMcom SIM7100 | v6.xx(ppp) v7.xx (LTE) | Works! PPP interface. And starting with v7.xx it will support LTE interface. vendor-id="0x1e0e" device-id="0x9001" | MiniPCI-e / USB w/ converter | ? | LTE |
Sierra wireless MC73xx | v6.xx(ppp) v7.xx (LTE) | Works! PPP interface. And starting with v7.xx it will support LTE interface. MC7304 tested with firmware SWI9X15C_05.05.67.00 | MiniPCI-e | N | LTE |
Vodafone (Huawei) K4203 | v7.xx | Not supported in ROS v6, but as this modem supports MBIM drivers support will be possible in ROS v7. | USB | ? | LTE |
Huawei E3372 | v6.xx | Works! LTE interface. vendor-id="0x12d1" device-id="0x14dc" There is different versions of this modem available, not all work under RouterOS. Only cdc_ecm and Serial modems are supported. Modem firmware upgrade may be necessary. For ppp mode send AT^SETPORT="FF,12,1,16" data-channel=1 info-channel=0, other modes are explained in modems manual. | USB | N | LTE |
Huawei E8372 | v6.28 | Works! LTE interface only. vendor-id="0x12d1" device-id="0x14db" | USB | ? | LTE |
Telit LE910 | v6.xx | ppp interface, vendorid=0x1bc7 deviceid=0x1201 | MiniPCI-e | ? | LTE |
Quectel EC20/EC21 | v6.xx | ppp interface, there is page in wiki about Quectel: article | MiniPCI-e | ? | LTE |
Quectel EC25 | v6.39 | ppp/LTE interface, there is page in wiki about Quectel ppp mode: article | MiniPCI-e | ? | LTE |
Quectel EP06 | v6.42 | ppp/LTE interface, there is page in wiki about Quectel: article | MiniPCI-e | ? | LTE |
Huawei E3276-150 | v6.xx | ppp interface | USB | ? | LTE |
ZTE ME3630-E | v6.40RC26 | ppp and LTE interface | MiniPCI-e | ? | LTE |
Jaton MT421e | v6.40RC32 | LTE interface with Ethernet emulation (no configuration possible), LTE supported bands 42/43 | MiniPCI-e | ? | LTE |
Huawei E5673s-609 | v6.xx | LTE interface | USB | ? | LTE |
Novatel USB730L | v6.41RC6 | LTE interface | USB | ? | LTE |
Alcatel IK40 | v6.41RC11 | LTE interface, Modem can be configured only through modems configuration WEB page. | USB | ? | LTE |
Alcatel IK41 | v6.48 | Config-less LTE interface | USB | N | LTE |
Olivetti Olicard 500 | v6.41RC11 | ppp interface | USB | ? | LTE |
Netgear Unite Explore 815S | v6.41 | MIFI unit. No serial support, but works with IP on LTE interface. | USB | Y | LTE |
R11e-LTE | v6.39.2 | LTE interface. Supports multiple APN passthrough. | MiniPCI-e | Y | LTE |
SXT LTE | v6 | LTE interface. Old version of SXT LTE | Built-in | N | LTE |
SXT LTE kit | v6.42 | LTE interface from R11e-LTE/R11e-LTE-US mini-pcie module | Built-in | Y | LTE |
Quectel UC15 | v6.xx | Works, ppp interface | MiniPCI-e | 3G | |
Quectel UC20 | v6.xx | Works, ppp interface | MiniPCI-e | 3G | |
SIMcom SIM5360 | v6.xx | Works! Using PPP interface, vendor-id="0x05c6" device-id="0x9000" | MiniPCI-e / USB w/ converter | 3G | |
Huawei E171 | v6.xx | Works! ppp interface, vendorid=0x12d1 deviceid=0x140c | USB | 3G | |
D-link DWM-157 | v6.xx | Works! Data Channel: 2, Info Channel: 3,Modem Init: AT+CFUN=1, vendor-id="0x2001" device-id="0x7d02" Some info from modem: > H/W Ver.: B1, F/W Ver.: 2.0.1eu, revision: +CGMR: MOLY.WR8.W1231.DC.WG.MP.V3, 2013/04/09 02:08 Different HW revisions might not work with RouterOS | USB | 3G | |
AnyData ADU-E630WH | v6 | ( aka "USB Wireless HSDPA/UMTS 2.1GHz GSM/GPRS/EGPRS 900/17000MHz/CDMA 1x EVDO Rev.A") | USB | 3G | |
Ericsson F5521gw | v6.x and higher | MiniPCI-e | 3G | ||
ZTE AC5730 | v6.x | USB | 3G | ||
Huawei E153 | v6.31< and higher | USB | 3G | ||
ZTE MF110 | v6.28 and higher | Set info channel = 2, data channel = 2, Dial command=ATM1L3DT | USB | 3G | |
ZTE 821D | v6.x | Set Info channel = 1, Data channel = 3, Dial command=ATDT | USB | 3G | |
Huawei E3531 | v6.24 or 6.40RC25 | There are different versions of this modem E3531-6 works from version 6.40RC25 as ppp, mbim supported only from RouterOS V7 | USB | 3G | |
Huawei E3351 | v6.24 and higher | USB | 3G | ||
Dell Wireless 5530 HSPA | v6.1 and higher | Data channel 0, Info channel 0, init: AT+CFUN=1 (needs manualy change profile by command AT*ENAP=1,1) | MiniPCI-e | 3G | |
Telecom NZ T-Stick ZTE MF-181 | v6.0rc13 | Data Channel=2, Info Channel=2, APN internet.telecom.co.nz, PHONE=*99#. Tested ok for both data and SMS on CCR1016-12G | USB | 3G | |
Sierra Wireless MC7430 | v6.xx and higher | Data channel 2, Info channel 2, Modem init: AT+CGATT=0, Dial-command: AT+CGATT=1;D*99#, also needs 3.0 pins isolated (PINS:23,25,27,31,33) | MiniPCI-e | LTE | |
Sierra Netgear AirCard 320U | 6.41 | Customer tested the modem with firmware 03.05.23 | USB | N | LTE |
Huawei e398 | v6.xx and higher | ppp interface | USB | LTE | |
Huawei e3131 | v6.xx and higher | ppp interface | USB | 3G | |
ZTE MF90 | v6.44beta32 and higher | LTE interface | USB | N | LTE |
Telit LM940 | v6.44 | LTE interface in some cases needs 3.0 pins isolated (PINS:23,25,27,29,31,33) | MiniPCI-e | Y | LTE |
Telit LM960 | v6.46 | LTE interface in some cases needs 3.0 pins isolated (PINS:23,25,27,29,31,33) | MiniPCI-e | Y | LTE |
Telit LE910C1 | v6.46 | Non-configurable from RouterOS | MiniPCI-e | LTE | |
SIMCom 7600E | v6.x | MiniPCI-e | LTE | ||
Fibocom NL-952-EAU | v7.1beta5 | MBIM driver. Revision: 19600.7000.00.04.01.05 | M.2 | 3G, LTE | |
Fibocom FM150-AE | v7.1beta5 | MBIM driver. Revision: 89603.1000.00.01.01.03 | M.2 | 3G, LTE, 5G | |
Quectel EG25-G | 6.48.3 | ECM driver. Also supported in RouterOS v7 with MBIM dirver. | MiniPCI-e | GSM, 3G, LTE | |
Sierra Wireless MC7455 | v7.1 | MBIM driver. Interface bitmask: 00001009 (diag,modem,mbim) should be used(AT!USBCOMP=1,1,1009). | MiniPCI-e | 3G, LTE |
Note: Not all modems are listed. Localized and locked units may have compatibility issues. All modems using MBIM driver should work by default on RouterOS v7.
For some modems with USB3.0 support in some cases USB3.0 pins need to be isolated to ensure correct initialization:
SFP modules
Brand | Model | Rate | Connector/Cable type | Wavelength | Tested with | Works / Doesn't |
---|---|---|---|---|---|---|
MikroTik | S-85DLC05D | 1,25G | Dual LC, MM | 850nm | *Check: SFP/SFP+ compatibility reference table | Natively supported |
MikroTik | S-31DLC20D | 1,25G | Dual LC, SM | 1310nm | *Check: SFP/SFP+ compatibility reference table | Natively supported |
MikroTik | S-35LC20D | 1,25G | BiDi LC, SM | Tx:1310nm/Rx:1550nm | *Check: SFP/SFP+ compatibility reference table | Natively supported |
MikroTik | S-53LC20D | 1,25G | BiDi LC, SM | Tx:1550nm/Rx:1310nm | *Check: SFP/SFP+ compatibility reference table | Natively supported |
MikroTik | S-RJ01 | 1000/100/10 | RJ45, Cat5/Cat6 | N/A | *Check: SFP/SFP+ compatibility reference table | Natively supported |
Axiom | AXG91632 | 1000BASE-LX | Dual LC | 1310nm | CRS125-24G-1S-RM | Works! |
Finisar | FCLF-8521-3 | 10/100/1000 | RJ45, Cat6 | N/A | RB2011LS-IN | Works! |
Finisar | FCLF-8521-3-MD | 10/100/1000 | RJ45, Cat6 | N/A | RB2011LS-IN | Works! |
Finisar | FTRJ8519P1BNL-B1 | 10/100/1000 1.25 Gb/s 1000Base-SX Ethernet | Dual LC, MM | 850nm | RB2011LS-IN | Works! |
Finisar | FTLF8519P2BNL | 10/100/1000 1.25 Gb/s 1000Base-SX Ethernet | Dual LC, MM | 850nm | RB2011LS-IN | Works! |
Finisar | FTRJ1319P1BTL | 1.25Gb/s 1000Base-LX Ethernet | Dual LC, SM | 1310nm | CCR1009-8G-1S-1S+ and CCR1009-7G-1C-1S+ | Works! |
Unica | SFP-1.25G-T | 1000M | RJ45, Cat6 | N/A | RB2011LS-IN | Works! |
Dell | FTLX8571D3BCL | 1,25G | Dual LC, MM | 850nm | RB2011LS-IN | Works! |
Unica | GP-3124-L2CD-C | 1,25G | Dual LC, MM | 1310nm | RB2011LS-IN | Works! |
Cisco | GLC-T | 1.25G | RJ45, Cat6 | N/A | RB2011LS-IN | Works! |
Cisco | GLC-SX-MM | 1000BASE-SX SFP transceiver module for MMF, 1.25G | Dual LC, MM | 850nm | RB2011LS-IN | Works! |
Cisco | SFP-GE-L | 1000BASE-LX/LH SFP transceiver module for SMF, 1.25G | Dual LC, SM | 1300nm | Various MT hardware | Works! |
6COM | 6C-SFP-T | 10/100/1000 | RJ45, Cat6 | N/A | RB2011LS-IN | Works! |
6COM | 6C-WDM-0210BSD | 1,25G | BiDi SC, SM | Tx:1550nm/Rx:1310nm | RB2011LS-IN | Works! |
6COM | 6C-WDM-0210ASD | 1,25G | BiDi SC, SM | Tx:1310nm/Rx:1550nm | RB2011LS-IN | Works! |
6COM | 6C-SFP-0310D | 1,25G | Dual LC, MM | 1310nm | RB2011LS-IN | Works! |
6COM | 6C-SFP-0301D | 1,25G | Dual LC, MM | 850nm | RB2011LS-IN | Works! |
Ingellen | INSP-T(10/100/1000) | 10/100/1000 | RJ45, Cat6 | N/A | RB2011LS-IN | Works! |
Ingellen | INSPL-53-BX | 1,25G | BiDi LC, MM | 1550/1310 | RB2011LS-IN | Works! |
Ingellen | INSPL-35-BX | 1,25G | BiDi LC, MM | 1310/1550 | RB2011LS-IN | Works! |
Ingellen | INSP-LX-SM | 1,25G | Dual LC, SM | 1310nm | RB2011LS-IN | Works! |
Ingellen | INSP-SX-MM | 1,25G | Dual LC, MM | 850nm | RB2011LS-IN | Works! |
AXCEN | AXGT-R1T4-05I1 | 10/100/1000 | RJ45, Cat6 | N/A | RB2011LS-IN | Works! |
AXCEN | AXGD-37А4-0531 | 1,25G | BiDi LC, MM | Tx:1550nm/Rx:1310nm | RB2011LS-IN | Works! |
AXCEN | AXGD-16А4-0531 | 1,25G | BiDi LC, MM | Tx:1310nm/Rx:1550nm | RB2011LS-IN | Works! |
AXCEN | AXGD-1354-0531 | 1,25G | Dual LC, MM | 1310nm | RB2011LS-IN | Works! |
AXCEN | AXGD-5854-0511 | 1,25G | Dual LC, MM | 850nm | RB2011LS-IN | Works! |
TP-Link | TL-SM311LS | 1,25G | Dual LC, SM | 1310nm | RB2011LS-IN | Works! |
TP-Link | TL-SM311LM | 1,25G | Dual LC, MM | 850nm | CCR1036 12G-4S | Works! |
OPTIC | OPTIC-SFP-3524S-02-SC | 1,25G | BiDi SC, SM | Tx:1310nm/Rx:1550nm | RB2011UAS-RM, RB260GS | Works! |
OPTIC | OPTIC-SFP-5324S-02-SC | 1,25G | BiDi SC, SM | Tx:1550nm/Rx:1310nm | RB2011UAS-RM, RB260GS | Works! |
OPTIC | OPTIC-SFP-S1203-L3302-LC | 1,25G | BiDi LC, SM | Tx:1310nm/Rx:1550nm | RB2011UAS-RM, RB260GS | Works! |
OPTIC | OPTIC-SFP-S1205-L3302-LC | 1,25G | BiDi LC, SM | Tx:1550nm/Rx:1310nm | RB2011UAS-RM, RB260GS | Works! |
ROBOFiber | SFP-7120-55 | 1,25G | Dual LC, SM | 1550nm | CCR1036-12G-4S, RB2011 | Works! |
ROBOFiber | SFP-7120-WA | 1,25G | BiDi LC, MM | Tx:1490nm/Rx:1550nm | CCR, RB2011 | Works! |
ROBOFiber | SFP-7120-WB | 1,25G | BiDi LC, MM | Tx:1550nm/Rx:1490nm | CCR, RB2011 | Works! |
Enguity | SFP-3647603KM.b1310 XT | 1,25G | BiDi LC, SM | Tx:1310nm/Rx:1550nm | CCR, RB2011, RB260GS | Works! |
Enguity | SFP-3647603KM.b1550 XT | 1,25G | BiDi LC, SM | Tx:1550nm/Rx:1310nm | CCR, RB2011, RB260GS | Works! |
Enguity | SFP-3647610KM.b1490 XT | 1,25G | BiDi LC, SM | Tx:1490nm/Rx:1550nm | CCR, RB2011, RB260GS | Works! |
Enguity | SFP-3647610KM.b1550 XT | 1,25G | BiDi LC, SM | Tx:1550nm/Rx:1490nm | CCR, RB2011, RB260GS | Works! |
AdvOptics MSA | GLC-SX-MM | 1,25G | BiDi LC, MM | Tx:1310nm/Rx:1310nm | CCR, RB2011, RB260GS | Works! |
AdvOptics MSA | GLC-ZX-SM | 1,25G | BiDi LC, SM | Tx:1310nm/Rx:1310nm | CCR, RB2011, RB260GS | Works! |
Proline | GLC-BX-D20-PRO | 1,25G | BiDi LC, SM | Tx:1490nm/Rx:1310nm | CRS125 | Works! |
Proline | GLC-BX-D40-PRO | 1,25G | BiDi LC, SM | Tx:1310nm/Rx:1490nm | CRS125 | Works! |
Foundry Networks | E1MG-BXU-AC | 1,25G | BiDi LC, SM | Tx:1310nm/Rx:1490nm | RB3011UiAS, hAP ac | Works! |
Avago | SFBR-5799APZ | 1,25G | Dual LC, MM | 850nm | CRS326, CRS112 | Works in 1Gbps mode! |
Eltex | NTU-SFP-100 | 1,25G | SC | N/A | RB4011iGS+ | Works! |
SFP+ modules
Brand | Model | Distance | Rate | Connector/Cable type | Wavelength | Tested with | Works / Doesn't |
---|---|---|---|---|---|---|---|
MikroTik | S+85DLC03D | 300m | 10G | Dual LC, MM | 850nm | All MikroTik products with SFP/SFP+ interfaces | Natively supported |
MikroTik | S+31DLC10D | 10km | 10G | Dual LC, SM | 1310nm | All MikroTik products with SFP/SFP+ interfaces | Natively supported |
MikroTik | S+23LC10D | 10km | 10G | BiDi LC, SM | Tx:1270nm/Rx:1330nm | All MikroTik products with SFP/SFP+ interfaces | Natively supported |
MikroTik | S+32LC10D | 10km | 10G | BiDi LC, SM | Tx:1330nm/Rx:1270nm | All MikroTik products with SFP/SFP+ interfaces | Natively supported |
MikroTik | S+DA0001 | 1m | 10G | Twinax Copper | N/A | All MikroTik products with SFP/SFP+ interfaces | Natively supported |
MikroTik | S+DA0003 | 3m | 10G | Twinax Copper | N/A | All MikroTik products with SFP/SFP+ interfaces | Natively supported |
MikroTik | S+RJ10 | various, depending on link rate. Check brochure for more details | 10G/5G/2.5G/1G/100M/10M | RJ45 - Cat5E/Cat6/Cat7 | N/A | All MikroTik products with SFP+ interfaces | Natively supported |
Atop | APSP55B30CDL40 | 40km | 10G | Dual LC, SM | 1550nm | CRS series, CCR series devices with SFP+ interfaces | Does NOT work! |
Cisco | SFP-10G-LR | 10km | 10G | Dual LC, SM | 1310nm | RB2011LS-IN | Works! |
Dell (Finisar) | FTLX8571D3BCL | 300m | 10G | Dual LC, MM | 850nm | Most of SFP/SFP+ MikroTik products | Works! |
Juniper (Finisar) | FTLX8571D3BCL-J1 | 300m | 10G | Dual LC, MM | 850nm | Most of SFP/SFP+ MikroTik products | Works! |
Intel (Finisar) | FTLX8571D3BCV-IT | 300m | 10G | Dual LC, MM | 850nm | Most of SFP/SFP+ MikroTik products | Works! |
OEM (Juniper?) | EX-SFP-10GE-SR-OEM | 300m | 10G | Dual LC, MM | 850nm | Most of SFP/SFP+ MikroTik products | Works! |
Fiberstore | SFP-10G31-40 | 40km | 10G | Dual LC, SM | 1310nm | CRS series, CCR series devices with SFP+ interfaces | Works! |
Fiberstore | SFP-10G55-40 | 40km | 10G | Dual LC, SM | 1310nm | CRS series, CCR series devices with SFP+ interfaces | Works! |
Fiberstore | SFP-10G32-40 | 40km | 10G | BiDi LC, SM | Tx:1330nm/Rx:1270nm | CRS series, CCR series devices with SFP+ interfaces | Works! |
Fiberstore | SFP-10G23-40 | 40km | 10G | BiDi LC, SM | Tx:1270nm/Rx:1330nm | CRS series, CCR series devices with SFP+ interfaces | Works! |
Optech | OPAK-TX1-00-C | 30m | 10G | RJ45 - Cat 6a/7 Cable | N/A | CCR, CCR, CSS series devices with SFP+ interfaces | Works, starting with v6.40rc20 RouterOS build. |
ProLabs | SFP-10G-T-C | 30m | 10G | RJ45 - Cat 6a/7 Cable | N/A | CCR, CCR, CSS series devices with SFP+ interfaces | Works, starting with v6.40rc20 RouterOS build. |