Manual:IP/TFTP: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
* '''read-only''' (''default: no'') - sets if file can be written to, if set to "no" write attempt will fail with error | * '''read-only''' (''default: no'') - sets if file can be written to, if set to "no" write attempt will fail with error | ||
* '''hits''' - how many times this configuration entry has been executed (viewable only) | * '''hits''' - how many times this configuration entry has been executed (viewable only) | ||
[[Image:2009-04-03 1314.png]] | |||
Revision as of 12:15, 3 April 2009
RouterOS has a built-in TFTP server since v3.22
- ip-address (required) - range of IP addresses accepted as clients
- req-filename - requested filename as regular expression (regex)
- real-filename - if above two values are set and valid, the requested filename will be replaced with this. If this field is empty, the req-filename will be used. If multiple regex are specified in req-filename, with this field you can set which ones should match, so this rule is validated. real-filename format for using multiple regex is filename\0\5\6
- allow (default: yes) - to allow connection if above fields are set. if no, connection will be interrupted
- read-only (default: no) - sets if file can be written to, if set to "no" write attempt will fail with error
- hits - how many times this configuration entry has been executed (viewable only)
