Wireless Matrix: Difference between revisions
Jump to navigation
Jump to search
Fix names |
m moved Applicability Matrix to Wireless Matrix: Confusing name |
(No difference)
|
Revision as of 12:35, 19 October 2011
Feature Matrix General Information
- Feature Matrix indicates wireless network type when specific feature can be used.
- Note that there are 2 columns for 802.11 protocol: 802.11 specifies availability of mode in "pure" 802.11 network (when connecting to any vendor AP) and ROS 802.11 specifies availability of mode when connecting to RouterOS AP that implements necessary proprietary extensions for mode to work.
Wireless Features Matrix
The matrix specifies /interface wireless parameters compatibility with each wireless-protocol.
802.11 | ROS 802.11 | nstreme | nv2 | |
---|---|---|---|---|
adaptive-noise-immunity | V | V | V | V |
allow-sharedkey | V | V | V | |
antenna-gain | V | V | V | V |
antenna-gain | V | V | V | V |
antenna-mode | V | V | V | V |
area | V | V | V | V |
arp | V | V | V | V |
band | V | V | V | V |
basic-rates-a/g | V | V | V | V |
basic-rates-b | V | V | V | V |
bridge-mode | V | V | V | V |
burst-time | ||||
channel-width | V | V | V | V |
comment | V | V | V | V |
country | V | V | V | V |
default-ap-tx-limit | V | V | V | V |
default-authentication | V | V | V | V |
default-client-tx-limit | V | V | V | V |
default-forwarding | V | V | V | V |
dfs-mode | V | V | V | V |
disable-running-check | V | V | V | V |
disabled | V | V | V | V |
disconnect-timeout | V | V | V | |
distance | V | V | ||
frame-lifetime | V | V | ||
frequency | V | V | V | V |
frequency-mode | V | V | V | V |
hide-ssid | V | V | V | |
ht-ampdu-priorities | V | V | ||
ht-amsdu-limit | V | V | V | |
ht-amsdu-threshold | V | V | ||
ht-basic-mcs | V | V | V | V |
ht-guard-interval | V | V | V | V |
ht-rxchains | V | V | V | V |
ht-supported-mcs | V | V | V | V |
ht-txchains | V | V | V | V |
hw-fragmentation-threshold | V | V | ||
hw-protection-mode | V | V | ||
hw-protection-threshold | V | V | ||
hw-retries | V | V | V | |
l2mtu | V | V | V | V |
mac-address | V | V | V | V |
master-interface | V | V | V | |
mac-address | V | V | V | V |
max-station-count | V | V | V | V |
mode | V | V | V | V |
mtu | V | V | V | V |
name | V | V | V | V |
noise-floor-threshold | V | V | V | V |
nv2-cell-radius | V | |||
nv2-noise-floor-offset | V | |||
nv2-preshared-key | V | |||
nv2-qos | V | |||
nv2-queue-count | V | |||
nv2-security | V | |||
on-fail-retry-time | V | V | V | |
periodic-calibration | V | V | V | |
periodic-calibration-interval | V | V | V | |
preamble-mode | V | V | V | |
prism-cardtype | V | V | ||
proprietary-extensions | V | V | V | V |
radio-name | V | V | V | V |
rate-selection | V | V | V | V |
rate-set | V | V | V | V |
scan-list | V | V | V | V |
security-profile | V | V | V | * |
ssid | V | V | V | V |
station-bridge-clone-mac | V | V | V | |
supported-rates-a/g | V | V | V | V |
supported-rates-b | V | V | V | V |
tx-power | V | V | V | V |
tx-power-mode | V | V | V | V |
update-stats-interval | V | V | V | |
wds-cost-range | V | V | V | V |
wds-default-bridge | V | V | V | V |
wds-default-cost | V | V | V | V |
wds-ignore-ssid | V | V | V | |
wds-mode | V | V | V | V |
wireless-protocol | V | V | V | V |
wmm-support | V | V | V |
* - Nv2 protocol uses different security configuration.
WDS setups Matrix
The matrix specifies possible WDS network setups for each wireless-protocol. First column specifies possible WDS network structure.
ROS 802.11 | nstreme | nv2 | |
---|---|---|---|
AP-bridge* to AP-bridge | V | ||
AP-bridge to Station-WDS | V | V | V |
AP-bridge to WDS-Slave | V |
* - mode=ap-bridge applies to mode=bridge too.
Station modes Matrix
The matrix specifies station modes available for each wireless-protocol.
802.11 | ROS 802.11 | nstreme | nv2 | |
---|---|---|---|---|
station | V | V | V | V |
station-wds | V | V | V | |
station-pseudobridge | V | V | V | |
station-pseudobridge-clone | V | V | V | |
station-bridge | V | V | V |
More information about stations mode configuration.