RouterBOOT changelog

What's new in 3.18:

• ) fixed boot from non-2-power partition count;

What's new in 3.17:

• ) fixed boot from nand on yaffs (broken in 3.11);

What's new in 3.16:

• ) ar9344: fix etherboot problems on CRS125 (probably other boards

as well);

What's new in 3.15:

• ) qca9550: fix etherboot at 100Mbit/s speed (broken in v3.14);

What's new in 3.14:

• ) button: add cap function to reset button;

What's new in 3.13:

• ) setup menu: added 1 minute inactivity timeout;

What's new in 3.12:

• ) support for new products

What's new in 3.10:

• ) ar934x: fix RAM configuration for better stability;
• ) lcd: improve speed;

What's new in 3.09:

• ) ar7240: fix rare power-on problems;
• ) ar934x: fixes possible ethernet problems;
• ) WARNING: will auto reboot RB if RouterOS is older than v5.26;

What's new in 3.07:

• ) lcd: show "ether boot" instead of "loading kernel" when ether booting;
• ) fix rare "loading kernel" problem;
• ) ar9330: fix RAM configuration for better stability;

What's new in 3.05:

• ) fixed buzzer on Groove A-52HPn;
• ) fixed support for non 2 power partition count;

What's new in 3.2.1:

• ) fixed etherboot on p2020,mpc8544,amcc460;
• ) fix possible etherboot problems on ar7100,ar7240,ar9330,ar9342,ar9344;

What's new in 3.1.1 (ar7100,ar7240,ar9330,ar9340,ar9344,tilegx 3.02 release):

• ) ar9344: added new product support;
• ) fixed partition support not to hang bootup process;

What's new in 3.0.3:

• ) finished partition support, requires RouterOS v6.0rc5 or newer;

What's new in 3.0.1 (tilegx 3.0 release):

• ) pass routerboot version to RouterOS;

What's new in 3.0:

• ) reset buton now supports RouterOS reset also on serial-port devices (push button right after power is applied);

What's new in 3.0rc4

• ) ar9344: fix etherboot with ar8327 switch chip;
• ) ar9344: fix ethernet leds on 100MBs links;
• ) ar9344: fix xlna on SXT-2nDr2;
• ) ar9344: added lcd support on RB2011;
• ) tilegx: added support for CCR 1016/1036 boards;

What's new in 2.40.5 (ar9330 2.41 release):

• ) ar9330: fixes few rb951-2n errors;

What's new in 2.40.3 (ar7100 2.41 release):

• ) ar7100: fix RB411L to have configuration reset with button;
• ) fix sw version soft setting not to have multiple copies;

What's new in 2.40.2 (ar9344 2.41 release):

• ) fix for easy ar9344 stale booter detection;
• ) mips: reset some more CP0 registers to 0 on bootup;

What's new in 2.40.1:

• ) AR934x: fixed cache initialization (fixes RB2011 stall on decompressing);

What's new in 2.39.5 (ar9344 2.40 release):

• ) AR9344: added user-led support for RB2011;
• ) added AR8327 rev B support (RB2011, RB433GL);

What's new in 2.39.4 (ar7240 2.39 release):

• ) yaffs kernel load improvement;
• ) P2020: faster kernel loading (ubifs optimization);

What's new in 2.39.3:

• ) AR934x: increase AHB bus speed from DDR / 3 -> CPU / 3;
• ) AR9344: improve NAND speed;
• ) AR7100: remove duplicate spi access code (bios got smaller);
• ) AR7240: fixed button reset (broken in 2.38.3);

What's new in 2.39.2 (mpc8544 2.39 release):

• ) AR7100: fix RB433L etherboot led behavior;
• ) AR9344: setup DDR RAM voltage before accessing it;
• ) mips: change cpu mode description;

What's new in 2.39.1 (ar9330 2.39 release):

• ) AR9330: fixed support for 40 MHz crystal;
• ) AR7100: fixed NAND access through CPLD (broken in 2.38.3);
• ) added 64MB large page nand support;

What's new in 2.38.4 (ar9344,ar9330 2.39 prerelease):

• ) AR9344: fixed etherboot on RB2011;

What's new in 2.38.3 (p2020 2.39 release):

• ) P2020: increase kernel partition size to 8MB on large page nands;
• ) AR7xxx: fix cfg not to be lost at kernel load from nand;

What's new in 2.38.2 (ar9344 2.38 release):

• ) AR9344: fix ethernet switching on RB2011;
• ) P2020: fix 128 MB Samsung nand detection;

What's new in 2.38.1 (amcc460 2.38 release):

• ) AMCC460: fix support for some RAM modules;

What's new in 2.38:

• ) added support for some new products;

What's new in 2.37:

• ) pin-hole reset: changed default boot device to flashfig;
• ) added support for some new products;

What's new in 2.36:

• ) added support for some new products;

What's new in 2.35:

• ) fixed wireless throughput on SXT 5HnD (broken in 2.34);

What's new in 2.34:

• ) fixed wireless throughput on RB711 and Groove (broken in 2.31);

What's new in 2.33:

• ) added support for Groove;
• ) added support for RB751G;

What's new in 2.32:

• ) fixed beep after failed flashfig on SXT 5HnD;

What's new in 2.31:

• ) Slight SXT booting speed improvement
• ) Flashfig initialization improvements (makes sound if Flashfig server not used)

What's new in 2.30:

• ) fixed RB1000 not to reset configuration all the time (broken in v2.29);

What's new in 2.29:

• ) fixed rare issue with large nand booting;
• ) fixed RB800 and RB1100 to turn on user led during boot-up;
• ) fixed RB711 to turn off user led during boot-up;

What's new in 2.28:

• ) fixed problem - wireless did not show up on some RB411 units with 18V PoE power supply;

What's new in 2.27:

• ) memory fix for RB800/RB1000/RB1100;
• ) fixed problem - sometimes wireless was missing on RB711 after reboot;
• ) fixed pin-hole reset on RB750G;

What's new in 2.26:

• ) added RB816 support on RB600;
• ) fixed router hangup during etherboot if blasted with lots of packets;
• ) added silent boot;
• ) fixed Flashfig;

What's new in 2.25:

• new feature - Flashfig;
• fixed etherboot on RB493;
• fixed occasional lockup of kernel image loading on RB400 series;
• added disable UART feature;

What's new in 2.24:

• added support for RB816;

What's new in 2.23:

• added support for RB750G;
• added support for RB800;

What's new in 2.22:

• fixed support for RB750;

What's new in 2.21:

• added support for RB750;

What's new in 2.20:

• added support for RB450G;

What's new in 2.19:

• fixed support for MLC NAND chip;
• fixed memory issue on RB600;

What's new in 2.18:

• fixed via-rhine disappearing on RB532 and RB564;
• added support for RB493AH;

What's new in 2.17:

• added support for MLC NAND chip;

What's new in 2.16:

• fixed bug - boot from NAND on RB532A could fail (bug introduced in 2.13);
• fixed bug - etherboot on RB433/RB450 at 10Mbit did not work;

What's new in 2.15:

• fixed RB333 overheating problem;
• added support for microSD card on RB433;

What's new in 2.14:

• fixed nand boot on RB150 (broken in v2.13);

What's new in 2.13:

• improved memtest;
• fixed RB600 memory issue;

What's new in 2.12:

• nand improvement for RB532A;

What's new in 2.11:

• fixed bug - in one rare case boot from NAND could fail with "data is corrupted" message while data is correctable in reality;

What's new in 2.10:

• 100ms delay before PCI bus are initialized;

What's new in 2.9:

• added support for RB192;

What's new in 2.8:

• fixed CompactFlash resetting router config on RB153 (broken in v2.7);

What's new in 2.7:

• fixed bug - RouterOS command "/system reset-configuration"

was not resetting RB532 VIA ethernet mac address to default;

• added support for RB532r5;

What's new in 2.6:

• fixed CompactFlash reseting router config on RB153;

What's new in 2.4:

• fixed etherboot on RB100 to work reliably;

What's new in 2.2:

• fixed repeated initrd image loading;

What's new in 2.1:

• fixed crash during memory test within RouterBOOT;

What's new in 2.0:

• added support for RB153;

What's new in 1.13:

• fixed nand format feature to mark back really bad blocks as bad;

What's new in 1.12:

• reset-jumper resets bios settings to defaults;

What's new in 1.11:

• fixed reboot failure on RB500 with new RAM modules;

What's new in 1.10:

• added workaround for reboot failure on RB500 with new RAM modules;

What's new in 1.9:

• new boot option - "boot NAND, if fail then Ethernet";

What's new in 1.8:

• fixed bug - it was possible for RB500 booter to stop working completely;

What's new in 1.7:

• added nand format feature;

What's new in 1.3:

• added support for large block NAND devices;

What's new in 1.2:

• fixed bios entering on <delete> key for hyperterminal;
• routerboard 100 beep before jumping to kernel code;
• added nand READY/BUSY checking for rb100;
• improved speed for memory test;