Manual:USB Features: Difference between revisions
info about RB953GS |
mNo edit summary |
||
| Line 25: | Line 25: | ||
* <var>bus</var> (<em>integer</em>; Default: 1) - USB bus where power reset is applied. | * <var>bus</var> (<em>integer</em>; Default: 1) - USB bus where power reset is applied. | ||
{{ Note | '''RB953GS''': The miniPCIe slot closer to ethernet ports on the RB953GS board is the one which is shared with USB port and has configurable [[# | {{ Note | '''RB953GS''': The miniPCIe slot closer to ethernet ports on the RB953GS board is the one which is shared with USB port and has configurable [[#USB_port_type | USB port type]], its USB bus number is 1. Depending on [[#USB_port_type | USB port type]] the power reset is done on USB port or miniPCIe slot. The other miniPCIe slot closer to SFP slots has independent bus - 2.}} | ||
==USB port mode== | ==USB port mode== | ||
| Line 43: | Line 43: | ||
{{ Note | In RouterOS v5 this setting was called "use". }} | {{ Note | In RouterOS v5 this setting was called "use". }} | ||
{{ Note | '''RB953GS''': The miniPCIe slot closer to ethernet ports on the RB953GS board is the one which is shared with USB port and has configurable [[# | {{ Note | '''RB953GS''': The miniPCIe slot closer to ethernet ports on the RB953GS board is the one which is shared with USB port and has configurable [[#USB_port_type | USB port type]], its USB bus number is 1. Depending on [[#USB_port_type | USB port type]] the power reset is done on USB port or miniPCIe slot. The other miniPCIe slot closer to SFP slots has independent bus - 2.}} | ||
==RouterBoard USB port table== | ==RouterBoard USB port table== | ||
Information about RouterBoard USB features. | Information about RouterBoard USB features. | ||
Revision as of 09:25, 2 October 2014
Summary
Sub-menu: /system routerboard usb
Package: routerboard (v5) / system (v6)
Not all of the RouterBoards with USB ports have the same supported features. This article list all supported USB features by each RouterBoard.
USB power reset
USB power reset turns off USB port power for specified time. It is useful when 3G modem needs to be restarted but there is no direct access to it (tower installation).
Available properties:
- duration (time; Default: "3s") - Time interval how long power is turned off.
For example, turn off USB port power for 10 seconds:
/system routerboard usb power-reset duration=10s
RouterBoards with multiple USB buses also require bus specified in order to do USB power reset.
Available properties:
- duration (time; Default: "3s") - Time interval how long power is turned off.
- bus (integer; Default: 1) - USB bus where power reset is applied.
Note: RB953GS: The miniPCIe slot closer to ethernet ports on the RB953GS board is the one which is shared with USB port and has configurable USB port type, its USB bus number is 1. Depending on USB port type the power reset is done on USB port or miniPCIe slot. The other miniPCIe slot closer to SFP slots has independent bus - 2.
USB port mode
RB2011 series, CRS series and mAP have micro USB port which operates in host mode when USB device is attached through USB OTG cable. Some vendor cables require forced host mode to recognize connected device.
Available properties:
- usb-mode (automatic | force-host; Default: "automatic") - Defines USB port mode.
Note: In RouterOS v5 this setting was called "mode".
Warning: On RB2011 and CRS series boards USB devices may not work first time they are plugged in. In such cases power cycle (not reboot) is required.
USB port type
RB912UAG, RB922UAG and RB953GS have partially shared USB port and miniPCIe slot. Due to hardware restrictions it is possible to use only one at the time for 3G modem.
Available properties:
- type (USB-type-A | mini-PCIe; Default: "USB-type-A") - Type of enabled port.
Note: In RouterOS v5 this setting was called "use".
Note: RB953GS: The miniPCIe slot closer to ethernet ports on the RB953GS board is the one which is shared with USB port and has configurable USB port type, its USB bus number is 1. Depending on USB port type the power reset is done on USB port or miniPCIe slot. The other miniPCIe slot closer to SFP slots has independent bus - 2.
RouterBoard USB port table
Information about RouterBoard USB features.
| RouterBOARD | USB ports | Power Reset | USB powering |
| Cloud Core Router series | 1 | yes | yes |
| CRS109-8G-1S-2HnD | 1 | yes | yes |
| CRS125-24G-1S | 1 | yes | yes |
| RB OmniTik U-5HnD | 1 | yes | yes |
| RB OmniTik UPA-5HnD | 1 | yes | yes |
| RB SXT series
(excluding SXT Lite) |
1 | yes | yes |
| RB SXT G series | 1 | yes | yes |
| RB mAP 2n | 1 | yes | yes |
| RB2011UAS | 1 | yes | yes |
| RB2011UiAS | 1 | yes | yes |
| RB411GL | 1 | yes | yes |
| RB411U | 1 | no | yes |
| RB411UAHL | 1 | yes | yes |
| RB411UAHR | 1 | no | no* |
| RB433GL | 1 | yes | yes |
| RB433UL | 1 | yes | yes |
| RB433UAH | 2 | no | yes |
| RB433UAHL | 1 | yes | yes |
| RB435G | 2 | no | yes |
| RB493G | 1 | no | no* |
| RB711UA-2HnD | 1 | yes | yes |
| RB711UA-5HnD | 1 | yes | yes |
| RB750UP | 1 | no | yes |
| RB751G-2HnD | 1 | no | yes |
| RB751U-2HnD | 1 | no | yes |
| RB912UAG-2HPnD | 1 | yes | yes |
| RB912UAG-5HPnD | 1 | yes | yes |
| RB922UAGS-5HPacD | 1 | yes | yes |
| RB951G-2HnD | 1 | yes | yes |
| RB951Ui-2HnD | 1 | yes | yes |
| RB953GS-5HnT | 1 | yes | yes |
- * use of USB power injector is required in these models