Manual:Peripherals: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 321: | Line 321: | ||
| USB | | USB | ||
| | | | ||
| | | 3G | ||
|--- | |--- | ||
| Huawei E3531 | | Huawei E3531 | ||
| Line 328: | Line 328: | ||
| USB | | USB | ||
| | | | ||
| | | 3G | ||
|--- | |--- | ||
| Huawei E3351 | | Huawei E3351 | ||
Revision as of 10:57, 29 August 2017
This article describes supported add-on peripherals for RouterBOARD hardware devices.
Cellular modems
| Model | Tested RouterOS version | Comments | Format | Passthrough support | Technologies |
|---|---|---|---|---|---|
| BandRich C501 [1] | v5.25 and v6.0 | USB | ? | LTE | |
| Sierra Wireless MC7710/MC7700/MC7750 [2] | v5.25, v6.0 and 6.40RC43 |
If modem uses firmware 3.5 it should be upgraded to 3.5.23.2 firmware release in order to work in RouterOS correctly again. |
MiniPCI-e | N | LTE |
| Yota LU150 [3] | v5.22 and v6.4 | Some settings are ignored. Works in Russian markets. | USB | ? | LTE |
| Yota WLTUBA-107 [4] | v6.0 | Some settings are ignored. Works in Russian markets. | USB | ? | LTE |
| Yota wifi modem [5] | v6.7 | Some settings are ignored. Works in Russian markets. | USB | ? | LTE |
| Vodafone K4305 [6] | v6.7 | Some settings are ignored. | USB | ? | LTE |
| Android usb tethering interface | v6.7 | Some settings are ignored. | USB | ? | LTE |
| ZTE MF823 | v6.8 | Some settings are ignored. For some devices it's needed to enter in FACTORY mode to change operating state. | USB | ? | LTE |
| ZTE MF825A | v6.xx | Some settings are ignored. | USB | ? | LTE |
| Vodafone K5160 [7] | v6.37 | Some settings are ignored. | USB | ? | LTE |
| Vodafone K4201-Z [8] | v6.8 | Some settings are ignored. LTE interface. | USB | ? | LTE |
| ZTE MF827 [9] | v6.8 | Some settings are ignored. | USB | ? | LTE |
| Huawei E3272 | v6.8 | Some settings are ignored. There are multiple versions of this modem. Looks like only modem with device-id="0x14db" works as LTE interface. | USB | ? | LTE |
| Huawei E5377 | v6.36.1 | MIFI unit. No serial support, but works with IP on LTE interface | USB | ? | LTE |
| Huawei MU609 [10] | v6.11 | MiniPCI-e | ? | LTE | |
| Huawei MU709s-2 [11] | v6.28 | MiniPCI-e | Y | LTE | |
| Huawei ME909u-521 [12] | v6.11 | MiniPCI-e | N | LTE | |
| Huawei ME909s-120 [13] | v6.28 | MiniPCI-e | Y | LTE | |
| SIMcom SIM7100 | v6.xx(ppp) v7.xx (LTE) | Works! PPP interface. And starting with v7.xx it will support LTE interface. vendor-id="0x1e0e" device-id="0x9001" | MiniPCI-e / USB w/ converter | ? | LTE |
| Sierra wireless MC73xx | v6.xx(ppp) v7.xx (LTE) | Works! PPP interface. And starting with v7.xx it will support LTE interface. | MiniPCI-e | ? | LTE |
| Vodafone (Huawei) K4203 | v7.xx | Not supported in ROS v6, but as this modem supports MBIM drivers support will be possible in ROS v7. | USB | ? | LTE |
| Huawei E3372 | v6.xx | Works! LTE interface. vendor-id="0x12d1" device-id="0x14dc" There is different versions of this modem available, not all work under RouterOS. Only cdc_ecm and Serial modems are supported. | USB | Y | LTE |
| Huawei E8372 | v6.28 | Works! LTE interface only. vendor-id="0x12d1" device-id="0x14db" | USB | ? | LTE |
| Telit LE910 | v6.xx | ppp interface, vendorid=0x1bc7 deviceid=0x1201 | MiniPCI-e | ? | LTE |
| Quectel EC20/EC21/EC25 | v6.xx | ppp interface, there is page in wiki about Quactel: article | MiniPCI-e | ? | LTE |
| Huawei E3276-150 | v6.xx | ppp interface | USB | ? | LTE |
| ZTE ME3630-E | v6.40RC26 | ppp interface | MiniPCI-e | ? | LTE |
| Jaton MT421e [14] | v6.40RC32 | LTE interface, LTE supported bands 42/43 | MiniPCI-e | ? | LTE |
| Huawei E5673s-609 | v6.xx | LTE interface | USB | ? | LTE |
| Novatel USB730L | v6.41RC6 | LTE interface | USB | ? | LTE |
| Alcatel IK40 | v6.41RC11 | LTE interface | USB | ? | LTE |
| Olivetti Olicard 500 | v6.41RC11 | ppp interface | USB | ? | LTE |
| Netgear Unite Explore 815S | v6.41 | MIFI unit. No serial support, but works with IP on LTE interface. | USB | Y | LTE |
| R11e-LTE | v6.39.2 | LTE interface. Supports multiple APN passthrough. | MiniPCI-e | Y | LTE |
| SXT LTE | LTE interface | Built-in | N | LTE | |
| Quectel UC15 | v6.xx | Works, ppp interface | MiniPCI-e | 3G | |
| Quectel UC20 | v6.xx | Works, ppp interface | MiniPCI-e | 3G | |
| SIMcom SIM5360 | v6.xx | Works! Using PPP interface, vendor-id="0x05c6" device-id="0x9000" | MiniPCI-e / USB w/ converter | 3G | |
| Huawei E171 | v6.xx | Works! ppp interface, vendorid=0x12d1 deviceid=0x140c | USB | 3G | |
| D-link DWM-157 | v6.xx | Works! Data Channel: 2, Info Channel: 3,Modem Init: AT+CFUN=1, vendor-id="0x2001" device-id="0x7d02" Some info from modem: > H/W Ver.: B1, F/W Ver.: 2.0.1eu, revision: +CGMR: MOLY.WR8.W1231.DC.WG.MP.V3, 2013/04/09 02:08 Different HW revisions might not work with RouterOS | USB | 3G | |
| AnyData ADU-E630WH | v6 | ( aka "USB Wireless HSDPA/UMTS 2.1GHz GSM/GPRS/EGPRS 900/17000MHz/CDMA 1x EVDO Rev.A") | USB | 3G | |
| Ericsson F5521gw | v6.x and higher | MiniPCI-e | 3G | ||
| ZTE AC5730 | v6.x | USB | 3G | ||
| Huawei E153 | v6.31< and higher | USB | 3G | ||
| ZTE MF110 | v6.28 and higher | Set info channel = 2, data channel = 2, Dial command=ATM1L3DT | USB | 3G | |
| Huawei E3531 | v6.24 or 6.40RC25 | There are different versions of this modem E3531-6 works from version 6.40RC25 as ppp, mbim supported only from RouterOS V7 | USB | 3G | |
| Huawei E3351 | v6.24 and higher | USB | 3G | ||
| Dell Wireless 5530 HSPA | v6.1 and higher | Data channel 0, Info channel 0, init: AT+CFUN=1 (needs manualy change profile by command AT*ENAP=1,1) | MiniPCI-E | 3G | |
| Telecom NZ T-Stick ZTE MF-181 | v6.0rc13 | Data Channel=2, Info Channel=2, APN internet.telecom.co.nz, PHONE=*99#. Tested ok for both data and SMS on CCR1016-12G | USB | 3G | |
| Huawei MU609 | v | Data channel=4, Info channel=2, Keep info channel open | MiniPCI-e | 3G | |
| Huawei ME909u-521 | v6.0 | Data channel=4, Info channel=2, Keep info channel open | MiniPCI-e | 3G |
Not all modems are listed. Localized and locked units may have compatibility issues.
To add more modems please contact support@mikrotik.com
mbim, RMNet driver modems can be only added to RouterOS V7 (ETA unknown)