Manual:Tools/Speed Test: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
<p> | <p> | ||
The Speed Test is easy test tool for measuring ping, jitter, TCP and UDP throughput from one MikroTik device, to another.<br/> | The Speed Test is easy test tool for measuring ping, jitter, TCP and UDP throughput from one MikroTik device, to another.<br/> | ||
"speed-test" command is based on [[ Manual:Tools/Ping | Ping Tool]] and [[ Manual:Tools/Bandwidth_Test | Bandwidth Test]] | |||
</p> | </p> | ||
==General interface properties== | ==General interface properties== | ||
| Line 49: | Line 50: | ||
|arg=user | |arg=user | ||
|type=string | |type=string | ||
|default= | |default=admin | ||
|desc=Remote device username | |desc=Remote device username | ||
}} | }} | ||
==Usage example== | |||
Bandwidth and speed tests should be done through the link or device under test (DUT) on powerful devices to ensure that DUT CPU is not bottleneck due to traffic generating process. | |||
To run simple test from device A (192.168.88.1) to device B (192.168.88.2) | |||
<pre> | |||
[admin@MikroTik]] > /tool speed-test address=192.168.88.1 | |||
status: done | |||
time-remaining: 0s | |||
ping-min-avg-max: 541us / 609us / 3.35ms | |||
jitter-min-avg-max: 0s / 76us / 2.76ms | |||
loss: 0% (0/100) | |||
tcp-download: 921Mbps local-cpu-load:30% | |||
tcp-upload: 920Mbps local-cpu-load:30% remote-cpu-load:25% | |||
udp-download: 917Mbps local-cpu-load:6% remote-cpu-load:21% | |||
udp-upload: 916Mbps local-cpu-load:20% remote-cpu-load:6% | |||
</pre> | |||
If any of device CPU utilization during test reaches 100% warning message will appear: | |||
<pre> | |||
[admin@MikroTik]] > /tool speed-test address=192.168.88.1 | |||
;;; results can be limited by cpu, note that traffic generation/termination | |||
performance might not be representative of forwarding performance | |||
status: done | |||
time-remaining: 0s | |||
ping-min-avg-max: 541us / 609us / 3.35ms | |||
jitter-min-avg-max: 0s / 76us / 2.76ms | |||
loss: 0% (0/100) | |||
tcp-download: 721Mbps local-cpu-load:78% | |||
tcp-upload: 820Mbps local-cpu-load:100% remote-cpu-load:84% | |||
udp-download: 906Mbps local-cpu-load:10% remote-cpu-load:54% | |||
udp-upload: 895Mbps local-cpu-load:55% remote-cpu-load:12% | |||
</pre> | |||
"test-duration" parameter allows changing duration of all of the 5 tests: | |||
*) Ping test with 50ms delay | |||
*) TCP recieve | |||
*) TCP send | |||
*) UDP recieve | |||
*) UDP send | |||
{{cont}} | {{cont}} | ||
[[Category:Manual]] | [[Category:Manual]] | ||
[[Category:Tools]] | [[Category:Tools]] | ||
Revision as of 14:55, 29 November 2018
Applies to RouterOS: v6.44beta39+
Summary
Sub-menu: /tool
Packages required: system
The Speed Test is easy test tool for measuring ping, jitter, TCP and UDP throughput from one MikroTik device, to another.
"speed-test" command is based on Ping Tool and Bandwidth Test
General interface properties
Sub-menu: /tool speed-test
| address (IP address; Default: "") | IP address of host |
| connection-count (integer; Default: 20) | If device has more than 20 cores - core count will be used |
| password (string; Default: ) | Password for the remote device |
| test-duration (integer; Default: 10) | Duration for each test |
| user (string; Default: admin) | Remote device username |
Usage example
Bandwidth and speed tests should be done through the link or device under test (DUT) on powerful devices to ensure that DUT CPU is not bottleneck due to traffic generating process.
To run simple test from device A (192.168.88.1) to device B (192.168.88.2)
[admin@MikroTik]] > /tool speed-test address=192.168.88.1
status: done
time-remaining: 0s
ping-min-avg-max: 541us / 609us / 3.35ms
jitter-min-avg-max: 0s / 76us / 2.76ms
loss: 0% (0/100)
tcp-download: 921Mbps local-cpu-load:30%
tcp-upload: 920Mbps local-cpu-load:30% remote-cpu-load:25%
udp-download: 917Mbps local-cpu-load:6% remote-cpu-load:21%
udp-upload: 916Mbps local-cpu-load:20% remote-cpu-load:6%
If any of device CPU utilization during test reaches 100% warning message will appear:
[admin@MikroTik]] > /tool speed-test address=192.168.88.1
;;; results can be limited by cpu, note that traffic generation/termination
performance might not be representative of forwarding performance
status: done
time-remaining: 0s
ping-min-avg-max: 541us / 609us / 3.35ms
jitter-min-avg-max: 0s / 76us / 2.76ms
loss: 0% (0/100)
tcp-download: 721Mbps local-cpu-load:78%
tcp-upload: 820Mbps local-cpu-load:100% remote-cpu-load:84%
udp-download: 906Mbps local-cpu-load:10% remote-cpu-load:54%
udp-upload: 895Mbps local-cpu-load:55% remote-cpu-load:12%
"test-duration" parameter allows changing duration of all of the 5 tests:
- ) Ping test with 50ms delay
- ) TCP recieve
- ) TCP send
- ) UDP recieve
- ) UDP send
[ Top | Back to Content ]