Manual:IPv6/ND: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 128: Line 128:
|type=<nowiki>unspecified | time</nowiki>
|type=<nowiki>unspecified | time</nowiki>
|default=unspecified
|default=unspecified
|desc=
}}
==Prefix==
<p id="shbox"><b>Sub-menu:</b> <code>/ipv6 nd prefix</code>
</p>
<br />
===Properties===
{{Mr-arg-table-h
|prop=Property
|desc=Description
}}
{{Mr-arg-table
|arg=
|type=<nowiki>yes | no</nowiki>
|default=
|desc=
}}
{{Mr-arg-table-end
|arg=
|type=<nowiki>yes | no</nowiki>
|default=
|desc=
|desc=
}}
}}

Revision as of 08:54, 2 June 2010

Applies to RouterOS: v3, v4 +

Summary

Sub-menu: /ipv6 nd
Standards: RFC 2462
Package : IPv6


RouterOS has stateless IPv6 address autoconfiguration router-side support using Router Advertisement Daemon (RADVD). Prefixes of all addresses with 64 bit netmask are advertised by default.


General configuration

Sub-menu: /ipv6 nd


The menu contains one or more interface definitions on which router advertisement (RA) will be sent. Each entry describes the information which is included in the RA of a specific interface.

Properties

Property Description
advertise-dns (yes | no; Default: no)
advertise-mac-address (yes | no; Default: yes)
comment (string; Default: ) Descriptive name of an item
disabled (yes | no; Default: no) Whether item is disabled or not. By default entry is enabled.
hop-limit (unspecified | integer[0..4294967295]; Default: unspecified)
interface (all | string; Default: )
managed-address-configuration (yes | no; Default: no)
mtu (unspecified | integer[0..4294967295]; Default: unspecified)
other-configuration (yes | no; Default: no)
ra-delay (time; Default: 3s)
ra-interval (time[3s..20m50s]-time[4s..30m]; Default: 3m20s-10m)
ra-lifetime (none | time; Default: 30m)
reachable-time (unspecified | time[0..1h]; Default: unspecified)
retransmit-interval (unspecified | time; Default: unspecified)


Prefix

Sub-menu: /ipv6 nd prefix


Properties

Property Description
(yes | no; Default: )
(yes | no; Default: )


[ Top | Back to Content ]