Manual:Tools/IP-Scan: Difference between revisions
Jump to navigation
Jump to search
m add category |
|||
| Line 71: | Line 71: | ||
There is a possibility to set both but then results may be inconclusive | There is a possibility to set both but then results may be inconclusive | ||
{{cont}} | |||
[[Category:Manual | I]] | |||
[[Category:Tools | I]] | |||
Revision as of 13:57, 5 November 2010
Summary
Sub-menu: /tool ip-scan
Standards:
IP Scan tool allows user to scan network based on some network prefix or by setting interface to listen to. Either way tool collects certain data from the network.
Properties
| Property | Description |
|---|---|
| address (string; Default: ) | IP address of network device. |
| mac-address (string; Default: ) | MAC address of network device. |
| time (integer in ms; Default: ) | response time of seen network device when found |
| DNS (string; Default: ) | DNS name of network device |
| SNMP (string; Default: ) | SNMP name of the device |
| NET-BIOS (string; Default: ) | NET-BIOS name of device if advertised by device |
How to use
When using IP scan tool user must choose what it wants to scan for:
- certain IPv4 prefix
tool will attempt to scan all the addreses or address set in address.
- interface of the router
tool will attempt to listen to packets that are "passing by" and attempt to compile results when something is found
There is a possibility to set both but then results may be inconclusive
[ Top | Back to Content ]