Manual:IP/SSH: Difference between revisions
Jump to navigation
Jump to search
initial post |
→Example: categories added |
||
| Line 28: | Line 28: | ||
now when user uses ''telnet localhost 3000" it will log in the router using telnet over encrypted tcp connection. | now when user uses ''telnet localhost 3000" it will log in the router using telnet over encrypted tcp connection. | ||
[[Category:Manual|T]] [[Category:IP|T]] [[Category:Console|S]] | |||
Revision as of 15:32, 16 March 2011
Summary
This menu controls if ssh port forwarding is/is not allowed on the router. Enabling this feature remote hosts are able to create ssl encrypted connection from remote host to router port.
Note: This feature is available starting 5.0rc1
Settings
| Property | Desciption |
|---|---|
| forwarding-enabled (no|yes default:no) | controls ssh port forwarding |
Example
To use this feature from Linux host using OpenSSH client this command can be used:
ssh reamoteuser@remotehost -L port:remotehost:remoteport
where:
- remoteuser - user of router
- remotehost - router address (if host name is used in -L settings, router should be able to resolve this name)
- port - local port that your host will listen on
- remoteport - port on the router
If user requires telnet to router, but you do not want to allow it to be plain text, Following can be done:
ssh admin@192.168.88.1 -L 3000:192.168.88.1:23
now when user uses telnet localhost 3000" it will log in the router using telnet over encrypted tcp connection.