Manual:Interface/Gre: Difference between revisions
Jump to navigation
Jump to search
Created page with '{{Versions|v5+}} ==Summary== <p id="shbox"><b>Sub-menu:</b> <code>/interface gre</code> <br /> <b>Standards:</b> <code>GRE RFC 1701</code></p> <br /> ===Properties=== {{Mr-…' |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Versions|v5+}} | {{Versions|v5+}} | ||
__TOC__ | |||
| Line 8: | Line 9: | ||
<br /> | <br /> | ||
GRE (generic routing encapsulation) is a tunneling protocol that was originally developed by Cisco. It can encapsulate wide variety of protocols creating virtual point-to-point link. | |||
Revision as of 11:02, 16 August 2011
Applies to RouterOS: v5+
Summary
Sub-menu: /interface gre
Standards: GRE RFC 1701
GRE (generic routing encapsulation) is a tunneling protocol that was originally developed by Cisco. It can encapsulate wide variety of protocols creating virtual point-to-point link.
Properties
| Property | Description |
|---|---|
| arp (disabled | enabled | proxy-arp | reply-only; Default: ) | Address Resolution Protocol mode |
| comment (string; Default: ) | Short description of the tunnel. |
| disabled (yes | no; Default: no) | Whether tunnel is enabled. |
| keepalive (integer [1..4294967295]; Default: ) | |
| l2mtu (integer [0..65536]; Default: 65535) | Layer2 Maximum transmission unit. |
| local-address (IP; Default: 0.0.0.0) | Ip addres that will be used as local tunnel end. If set to 0.0.0.0 then ip address of outgoing interface will be taken. |
| mtu (integer [0..65536]; Default: 1476) | Layer3 Maximum transmission unit. |
| name (string; Default: ) | Name of the tunnel. |
| remote-address (IP; Default: ) | IP address of remote tunnel end. |
Setup examples
[ Top | Back to Content ]