Manual:MPLS: Difference between revisions
No edit summary |
No edit summary |
||
| Line 93: | Line 93: | ||
==Forwarding Table== | ==Forwarding Table== | ||
<p id="shbox"><b>Sub-menu:</b> <code>/mpls forwarding-table</code></p> | |||
Entries in this sub-menu shows label bindings for specific routes that will be used in MPLS label switching | |||
==Interface== | ==Interface== | ||
<p id="shbox"><b>Sub-menu:</b> <code>/mpls interface</code></p> | |||
This menu allows to configure MTUs including MPLS headers that interface can forward without fragmentation. | |||
{{Note| If Ethernet card does not support Jumbo frames, then MPLS MTU for all interfaces on all devices participating in LSP should be set to 1500}} | |||
'''Properties''' | |||
{{Mr-arg-table-h | |||
|prop=Property | |||
|desc=Description | |||
}} | |||
{{Mr-arg-table | |||
|arg=comment | |||
|type=string | |||
|default= | |||
|desc=Short description of the interface | |||
}} | |||
{{Mr-arg-table | |||
|arg=disabled | |||
|type=yes {{!}} no | |||
|default=no | |||
|desc=If set to '''yes''' then this configuration is ignored. | |||
}} | |||
{{Mr-arg-table | |||
|arg=interface | |||
|type=string {{!}} all | |||
|default=all | |||
|desc=Interface name to which apply settings. If set to '''all''' then the same config will be used for every interface if there is no specific configuration for the interface. | |||
}} | |||
{{Mr-arg-table-end | |||
|arg=mpls-mtu | |||
|type=integer [512..65535] | |||
|default=1508 | |||
|desc=Option represents how big packets can be carried over the interface with added MPLS labels. [[ Manual:Maximum_Transmission_Unit_on_RouterBoards#MPLS.2FLayer-2.5.2FL2.5_MTU | <code>Read More >></code>]] | |||
}} | |||
==Local Bindings== | ==Local Bindings== | ||
<p id="shbox"><b>Sub-menu:</b> <code>/mpls local-bindings</code></p> | |||
This sub-menu shows labels bound to the routes locally in the router | |||
==Remote Bindings== | ==Remote Bindings== | ||
<p id="shbox"><b>Sub-menu:</b> <code>/mpls remote-bindings</code></p> | |||
Sub-menu shows label bindings for routes received from other routers. This table is used to build [[#Forwarding Table | Forwarding Table]] | |||
Revision as of 13:05, 3 October 2011
Sub Categories
|
List of reference sub-pages |
Case studies |
List of examples |
|
General
|
General
|
Summary
MikroTik RouterOS supports MPLS. All MikroTik RouterBOARD hardware products support MPLS.
General Porperties
| Property | Description |
|---|---|
| dynamic-label-range (range of integer[16..1048575]; Default: 16-1048575) | Range of Label numbers used for dynamic allocation. First 16 labels are reserved for special purposes (as defined in RFC). If you intend to configure labels statically then adjust dynamic default range not to include numbers that will be used in static configuration. |
| propagate-ttl (yes | no; Default: yes) | Whether to copy TTL values from IP header to MPLS header. If this option is set to no then hops inside MPLS cloud will be invisible from traceroutes. |
Forwarding Table
Sub-menu: /mpls forwarding-table
Entries in this sub-menu shows label bindings for specific routes that will be used in MPLS label switching
Interface
Sub-menu: /mpls interface
This menu allows to configure MTUs including MPLS headers that interface can forward without fragmentation.
Note: If Ethernet card does not support Jumbo frames, then MPLS MTU for all interfaces on all devices participating in LSP should be set to 1500
Properties
| Property | Description |
|---|---|
| comment (string; Default: ) | Short description of the interface |
| disabled (yes | no; Default: no) | If set to yes then this configuration is ignored. |
| interface (string | all; Default: all) | Interface name to which apply settings. If set to all then the same config will be used for every interface if there is no specific configuration for the interface. |
| mpls-mtu (integer [512..65535]; Default: 1508) | Option represents how big packets can be carried over the interface with added MPLS labels. Read More >> |
Local Bindings
Sub-menu: /mpls local-bindings
This sub-menu shows labels bound to the routes locally in the router
Remote Bindings
Sub-menu: /mpls remote-bindings
Sub-menu shows label bindings for routes received from other routers. This table is used to build Forwarding Table
[ Top | Back to Content ]