Manual:PoE-Out

Summary

this page describes what boards can be powered using RB750UP and OmniTik UPA. More about features read in PoE out manual

Powered devices

Table contain information on what devices can be powered using RB750UP and OmniTik UPA as power source for PoE

Polarity: standard - blue pair positive, brown pair negative; reversed - blue pair negative , brown pair positive, any - either standard or reversed.

Device	forced-on	auto-on	polarity
RouterBOARD RB433GL	yes	yes	any
RouterBOARD RB450G	yes	yes	any
RouterBOARD RB711G-5HnD	yes	yes	any
RouterBOARD RB711G-5HnD	yes	yes	any
RouterBOARD RB450	yes	yes	standard
RouterBOARD RB750	yes	yes	standard
RouterBOARD RB112	yes	yes	standard
RouterBOARD RB153	yes	yes	standard
RouterBOARD RB433AH	yes	yes	standard
Motorolla Canopy	yes	yes	reversed
RouterBOARD RB435G	yes	yes	any
RouterBOARD RB493AH	yes	yes	standard
RouterBOARD RB532	yes	yes	standard
Ubiquity LOCO900	yes	yes	standard
Ubiquity Bullet M2	yes	yes	standard
Ubiquity Bullet M5	yes	yes	standard
Ubiquity NanoStation 2N	yes	yes	standard
Ubiquity NanoStation M365	yes	yes	standard
Ubiquity UniFi AP	yes	yes	standard
Ubiquity UniFi AP long range	yes	yes	standard

Wiring

If you want to power device that supports only reverse polarity using 'RB750UP and OmniTik UPA you have to make special cable that will swap required wires, thus enabling you to power these devices.

On one end you have to have standard RJ45 T568B wiring (orange striped, orange, green striped, blue, blue striped, green, brown striped, brown) and on other and has to have blue and brown pair swapped resulting in (orange striped, orange, green striped, brown, brown striped, green, blue striped, blue)