Manual:EoMPLS vs Cisco: Difference between revisions
Jump to navigation
Jump to search
Created page with "__TOC__ ==Summary== This article describes the basic setup of Point-to-Point EoMPLS with Cisco routers. In this example IOS 15.1 was used, configuration in older versions may d..." |
|||
| Line 3: | Line 3: | ||
==Summary== | ==Summary== | ||
This article describes the basic setup of Point-to-Point EoMPLS with Cisco routers. In this example IOS 15.1 was used, configuration in older versions may differ. | This article describes the basic setup of Point-to-Point EoMPLS with Cisco routers. In this example IOS 15.1 was used, configuration in older versions may differ. | ||
==Configuration== | |||
Consider network setup as ilustrated below: | |||
[[File:EoMPLS-cisco.png]] | |||
We will be setting up the layer 2 connection between the CE and PE routers as well as the MPLS and EoMPLS between PE routers. The layer 2 link between the CE and PE routers will be an Ethernet circuit. | |||
==See Also== | ==See Also== | ||
Revision as of 12:42, 25 May 2012
Summary
This article describes the basic setup of Point-to-Point EoMPLS with Cisco routers. In this example IOS 15.1 was used, configuration in older versions may differ.
Configuration
Consider network setup as ilustrated below:
We will be setting up the layer 2 connection between the CE and PE routers as well as the MPLS and EoMPLS between PE routers. The layer 2 link between the CE and PE routers will be an Ethernet circuit.