Manual:Performance Testing with Traffic Generator: Difference between revisions
Jump to navigation
Jump to search
Created page with "__TOC__ ==Summary== ==RB1100AHx2 Test setup== === Routing Performance Testing=== ==== DUT Config ==== <pre> /ip address add address=1.1.1.254/24 interface=ether1 network=1.1...." |
No edit summary |
||
Line 61: | Line 61: | ||
==== DUT Config ==== | ==== DUT Config ==== | ||
<pre> | |||
/interface bridge add | |||
/interface bridge port | |||
add bridge=bridge1 interface=ether1 | |||
add bridge=bridge1 interface=ether6 | |||
add bridge=bridge1 interface=ether11 | |||
</pre> | |||
==== Traffic Generator Config ==== | ==== Traffic Generator Config ==== | ||
<pre> | |||
/ip address | |||
add address=1.1.1.1/24 interface=ether1 network=1.1.1.0 | |||
add address=2.2.2.2/24 interface=ether6 network=2.2.2.0 | |||
add address=3.3.3.3/24 interface=ether11 network=3.3.3.0 | |||
/tool traffic-generator packet-template | |||
add header-stack=mac,ip,udp ip-src=1.1.1.1/32 ip-dst=2.2.2.2/32 name=b12 | |||
add header-stack=mac,ip,udp ip-src=1.1.1.1/32 ip-dst=3.3.3.3/32 name=b13 | |||
add header-stack=mac,ip,udp ip-src=2.2.2.2/32 ip-dst=1.1.1.1/32 name=b21 | |||
add header-stack=mac,ip,udp ip-src=2.2.2.2/32 ip-dst=3.3.3.3/32 name=b23 | |||
add header-stack=mac,ip,udp ip-src=3.3.3.3/32 ip-dst=1.1.1.1/32 name=b31 | |||
add header-stack=mac,ip,udp ip-src=3.3.3.3/32 ip-dst=2.2.2.2/32 name=b32 | |||
</pre> | |||
==== Running Tests==== | ==== Running Tests==== | ||
<pre> | |||
/tool traffic-generator | |||
quick tx-template=b12,b13,b21,b23,b31,b32 packet-size=60 mbps=200 | |||
/tool traffic-generator | |||
quick tx-template=b12,b13,b21,b23,b31,b32 packet-size=508 mbps=500 | |||
/tool traffic-generator | |||
quick tx-template=b12,b13,b21,b23,b31,b32 packet-size=1514 mbps=500 | |||
</pre> | |||
==See More== | ==See More== |
Revision as of 15:05, 11 October 2012
Summary
RB1100AHx2 Test setup
Routing Performance Testing
DUT Config
/ip address add address=1.1.1.254/24 interface=ether1 network=1.1.1.0 add address=2.2.2.254/24 interface=ether6 network=2.2.2.0 add address=3.3.3.254/24 interface=ether11 network=3.3.3.0
Traffic Generator Config
/ip address add address=1.1.1.1/24 interface=ether1 network=1.1.1.0 add address=2.2.2.2/24 interface=ether6 network=2.2.2.0 add address=3.3.3.3/24 interface=ether11 network=3.3.3.0 /tool traffic-generator packet-template add name=r12 header-stack=mac,ip,udp ip-gateway=1.1.1.254 ip-dst=2.2.2.2 add name=r13 header-stack=mac,ip,udp ip-gateway=1.1.1.254 ip-dst=3.3.3.3 add name=r21 header-stack=mac,ip,udp ip-gateway=2.2.2.254 ip-dst=1.1.1.1 add name=r23 header-stack=mac,ip,udp ip-gateway=2.2.2.254 ip-dst=3.3.3.3 add name=r32 header-stack=mac,ip,udp ip-gateway=3.3.3.254 ip-dst=2.2.2.2 add name=r31 header-stack=mac,ip,udp ip-gateway=3.3.3.254 ip-dst=1.1.1.1
Note: To force MAC address re-discovery (on device/configuration change, just apply emply "set" command to necessary packet-templates)
Running Tests
/tool traffic-generator quick tx-template=r12,r13,r21,r23,r31,r32 packet-size=60 mbps=300
We are specifying 60byte packet in traffic generator to get 64 byte packet on ethernet.
Do the same with different packet sizes:
/tool traffic-generator quick tx-template=r12,r13,r21,r23,r31,r32 packet-size=508 mbps=500 /tool traffic-generator quick tx-template=r12,r13,r21,r23,r31,r32 packet-size=1514 mbps=500
Note: mind that speed in quick mode is specified per stream, so if you have two streams per port, you need to send 1/2 of traffic per stream
Bridging Performance Testing
DUT Config
/interface bridge add /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=ether6 add bridge=bridge1 interface=ether11
Traffic Generator Config
/ip address add address=1.1.1.1/24 interface=ether1 network=1.1.1.0 add address=2.2.2.2/24 interface=ether6 network=2.2.2.0 add address=3.3.3.3/24 interface=ether11 network=3.3.3.0 /tool traffic-generator packet-template add header-stack=mac,ip,udp ip-src=1.1.1.1/32 ip-dst=2.2.2.2/32 name=b12 add header-stack=mac,ip,udp ip-src=1.1.1.1/32 ip-dst=3.3.3.3/32 name=b13 add header-stack=mac,ip,udp ip-src=2.2.2.2/32 ip-dst=1.1.1.1/32 name=b21 add header-stack=mac,ip,udp ip-src=2.2.2.2/32 ip-dst=3.3.3.3/32 name=b23 add header-stack=mac,ip,udp ip-src=3.3.3.3/32 ip-dst=1.1.1.1/32 name=b31 add header-stack=mac,ip,udp ip-src=3.3.3.3/32 ip-dst=2.2.2.2/32 name=b32
Running Tests
/tool traffic-generator quick tx-template=b12,b13,b21,b23,b31,b32 packet-size=60 mbps=200 /tool traffic-generator quick tx-template=b12,b13,b21,b23,b31,b32 packet-size=508 mbps=500 /tool traffic-generator quick tx-template=b12,b13,b21,b23,b31,b32 packet-size=1514 mbps=500