Manual:Interface/OVPN: Difference between revisions
| Line 332: | Line 332: | ||
* [[OpenVPN_Configuration_Step_by_Step | Basic OVPN setup]] | * [[OpenVPN_Configuration_Step_by_Step | Basic OVPN setup]] | ||
{{Cont}} | {{Cont}} | ||
Revision as of 14:19, 4 April 2013
Applies to RouterOS: v5+
Summary
Standards:
Package: ppp
Note: RouterOS supports only TCP mode. LZO compression is not supported and username/password authentication is required
OVPN Client
Sub-menu: /interface ovpn-client
Properties
| Property | Description |
|---|---|
| add-default-route (yes | no; Default: no) | Whether to add OVPN remote address as a default route. |
| auth (md5 | none | sha1; Default: sha1) | Allowed authentication methods. |
| certificate (string | none; Default: none) | Name of the client certificate imported into certificate list. |
| cipher (aes128 | aes192 | aes256 | blowfish128 | none; Default: blowfish128) | Allowed cipher. |
| comment (string; Default: ) | Descriptive name of an item |
| connect-to (IP; Default: 0.0.0.0) | Remote address of the OVPN server. |
| disabled (yes | no; Default: yes) | Whether interface is disabled or not. By default it is disabled. |
| mac-address (MAC; Default: ) | Mac address of OVPN interface. Will be auto generated if not specified. |
| max-mtu (integer; Default: 1500) | Maximum Transmission Unit. Max packet size that OVPN interface will be able to send without packet fragmentation. |
| mode (ip | ethernet; Default: ip) | Layer3 or layer2 tunnel mode (alternatively tun, tap) |
| name (string; Default: ) | Descriptive name of the interface. |
| password (string; Default: "") | Password used for authentication. |
| port (integer; Default: 1194) | Port to connect to. |
| profile (name; Default: default) | Used PPP profile. |
| user (string; Default: ) | User name used for authentication. |
Quick example
This example demonstrates how to set up OVPN client with username "test", password "123" and server 10.1.101.1
[admin@bumba] /interface ovpn-client> add connect-to=10.1.101.1 user=test password=123 disabled=no
[admin@bumba] /interface ovpn-client> print
Flags: X - disabled, R - running
0 name="ovpn-out1" mac-address=FE:7B:9C:F9:59:D0 max-mtu=1500 connect-to=10.1.101.1
port=1194 mode=ip user="test" password="123" profile=default certificate=none auth=sha1
cipher=blowfish128 add-default-route=no
OVPN Server
Sub-menu: /interface ovpn-server
This sub-menu shows interfaces for each connected OVPN clients.
An interface is created for each tunnel established to the given server. There are two types of interfaces in OVPN server's configuration
- Static interfaces are added administratively if there is a need to reference the particular interface name (in firewall rules or elsewhere) created for the particular user.
- Dynamic interfaces are added to this list automatically whenever a user is connected and its username does not match any existing static entry (or in case the entry is active already, as there can not be two separate tunnel interfaces referenced by the same name).
Dynamic interfaces appear when a user connects and disappear once the user disconnects, so it is impossible to reference the tunnel created for that use in router configuration (for example, in firewall), so if you need a persistent rules for that user, create a static entry for him/her. Otherwise it is safe to use dynamic configuration.
Note: in both cases PPP users must be configured properly - static entries do not replace PPP configuration.
Server configuration
Sub-menu: /interface ovpn-server server
Properties:
| Property | Description |
|---|---|
| auth (; Default: sha1,md5) | Authentication methods that server will accept. |
| certificate (name | none; Default: none) | Name of the certificate that OVPN server will use. |
| cipher (aes128 | none; Default: aes128,blowfish128) | |
| default-profile (name; Default: default) | |
| enabled (yes | no; Default: no) | Defines whether OVPN server is enabled or not. |
| keepalive-timeout (integer | disabled; Default: 60) | Defines the time period (in seconds) after which the router is starting to send keepalive packets every second. If no traffic and no keepalive responses has came for that period of time (i.e. 2 * keepalive-timeout), not responding client is proclaimed disconnected |
| mac-address (MAC; Default: ) | Auto Generated MAC address of the server. |
| max-mtu (integer; Default: 1500) | Maximum Transmission Unit. Max packet size that OVPN interface will be able to send without packet fragmentation. |
| mode (ip | ethernet; Default: ip) | |
| netmask (integer; Default: 24) | |
| require-client-certificate (yes | no; Default: no) | If set to yes, then server checks whether client's certificate belongs to the same certificate chain. |
[admin@bumba] /interface ovpn-server server> set enabled=yes
[admin@bumba] /interface ovpn-server server> set certificate=server
[admin@bumba] /interface ovpn-server server> print
enabled: yes
port: 1194
mode: ip
netmask: 24
mac-address: FE:A5:57:72:9D:EC
max-mtu: 1500
keepalive-timeout: 60
default-profile: default
certificate: server
require-client-certificate: no
auth: sha1,md5
cipher: blowfish128,aes128
Warning: It is very important that date on the router is in the range of certificate's date of expiration . To overcome any certificate verification problems, enable NTP date synchronization on both server and client.
Monitoring
Monitor command can be used to monitor status of the tunnel on both client and server.
[admin@dzeltenais_burkaans] /interface ovpn-server> monitor 0
status: "connected"
uptime: 17m47s
idle-time: 17m47s
user: "test"
caller-id: "10.1.101.18:43886"
mtu: 1500
Read-only properties
| Property | Description |
|---|---|
| status () | Current status. Value other than "connected" indicates that there are some problems estabising tunnel. |
| uptime (time) | Elapsed time since tunnel was established. |
| idle-time (time) | Elapsed time since last activity on the tunnel. |
| user (string) | Username used to establish the tunnel. |
| mtu (integer) | Negotiated and used MTU |
| caller-id (IP:ID) |
Application Examples
[ Top | Back to Content ]