Manual:System/LEDS: Difference between revisions
Jump to navigation
Jump to search
| Line 73: | Line 73: | ||
* <var>interface-status</var> - light the led on interface status change | * <var>interface-status</var> - light the led on interface status change | ||
* <var>interface-transmit</var> - blink the led on interface transmitted traffic | * <var>interface-transmit</var> - blink the led on interface transmitted traffic | ||
* <var>modem-signal</var> - blink the led on modem signal | * <var>modem-signal</var> - blink the led on 3G modem signal (eiher USB or miniPCIe) | ||
* <var>wireless-signal-strength</var> - light the leds displaying wireless signal (requires more than one led) | * <var>wireless-signal-strength</var> - light the leds displaying wireless signal (requires more than one led) | ||
* <var>wireless-status</var> - light the led on wireless status change. | * <var>wireless-status</var> - light the led on wireless status change. | ||
}} | }} | ||
==Basic examples== | ==Basic examples== | ||
Revision as of 09:52, 14 August 2013
Applies to RouterOS: v5 +
Summary
Sub-menu: /system leds
Standards:
RouterOS allows to configure each leds activity the way that user wishes. It is possible to configure the leds to display wireless strength, blink the leds on interface traffic activity and many other options.
For example default led configuration on Groove
[admin@MikroTik] /system leds> print
Flags: X - disabled
# TYPE INTERFACE LEDS
0 wireless-signal-strength led1
led2
led3
led4
led5
1 interface-activity ether1 user-led
RB Groove uses five leds for wireless strength and one for ethernet activity monitoring.
Configuration Properties
| Property | Description |
|---|---|
| disabled (yes | no; Default: no) | Whether item is disabled |
| interface (string; Default: ) | Name of the interface which will be used for led status. Applicable only if type is interface specific. |
| modem-signal-treshold (integer [-113..-51]; Default: ) | Applicable if type is modem-signal |
| leds (list of leds; Default: ) | List of led names used for status report. For example wireless signal strength will require more than one led. |
| type (flash-access | interface-activity | interface-receive | interface-status | interface-transmit | modem-signal | wireless-signal-strength | wireless-status; Default: ) | Type of the status:
|
Basic examples
[ Top | Back to Content ]