Manual:The Dude v6/The dude server on VM CHR: Difference between revisions

Revision as of 14:04, 28 January 2016

Work in progress...

---

1. Install CHR on one of supported hypervisors as VM. Detailed instructions can be found in this wiki article: CHR

2. Download The Dude server package and Windows Client application from MikroTik homepage download section: link

3. Upload this package to CHR host via (Winbox, Webfig, ftp) and reboot the VM to install the package.

4. Check that server is running or if necessary enable it.

/dude print

/dude set enabled=(yes/no)

[admin@MirkoTik] > dude print
         enabled: yes
  data-directory: dude
          status: running

5. Install The Dude client on your system and connect to VM ip address with default login credentials: Admin and empty password.

6. Check what to do next: Dude manual

@@ Line 1: / Line 1: @@
 Work in progress...
+---
+. Install CHR on one of supported hypervisors as VM. Detailed instructions can be found in this wiki article:
+[[Manual:CHR|CHR]]
+. Download The Dude server package and Windows Client application from MikroTik homepage download section:
+[http://www.mikrotik.com/download link]
+* Both x86 and CHR server package can be used for CHR host.
+. Upload this package to CHR host via (Winbox, Webfig, ftp) and reboot the VM to install the package.
+. Check that server is running or if necessary enable it.
+* Check dude status with command:
+<pre>/dude print</pre>
+* To enable or disable the dude server:
+<pre>/dude set enabled=(yes/no)</pre>
+* Example on what you should see.
+<pre>
+[admin@MirkoTik] > dude print
+         enabled: yes
+  data-directory: dude
+          status: running
+</pre>
+. Install The Dude client on your system and connect to VM ip address with default login credentials: Admin and empty password.
+. Check what to do next: [[Manual:The_Dude|Dude manual]]