Manual:VLANs on Wireless: Difference between revisions
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
abc. | abc. | ||
===Example 1=== | ====Example 1==== | ||
===Router1 configuration=== | |||
* | * Add necessary VLAN interfaces on ethernet interface to make it as a VLAN trunk port. Add ip addresses on VLAN interfaces. | ||
<pre> | <pre> | ||
[admin@R1] > | |||
/interface vlan | /interface vlan | ||
add interface=ether1 name=vlan110 vlan-id=110 | add interface=ether1 name=vlan110 vlan-id=110 | ||
| Line 20: | Line 21: | ||
</pre> | </pre> | ||
* | ===Router2 configuration=== | ||
* Add VirtualAP under wlan1 interface. ( Also create wireless security-profiles for wlan1 and wlan2) | |||
<pre> | <pre> | ||
[admin@R2] > | |||
/interface wireless | |||
set [ find default-name=wlan1 ] disabled=no mode=ap-bridge security-profile=vlan110 ssid=vlan110 vlan-id=110 wireless-protocol=802.11 | |||
add disabled=no keepalive-frames=disabled master-interface=wlan1 multicast-buffering=disabled name=wlan2 \ | |||
security-profile=vlan220 ssid=vlan220 vlan-id=220 wds-cost-range=0 wds-default-cost=0 | |||
</pre> | |||
* Add necessary VLAN interfaces on ethernet interface to make it as a VLAN trunk port. | |||
* Add bridges for each VLAN. | |||
* Add VLAN interfaces to their corresponding bridges and wireless interfaces to each bridge. | |||
<pre> | |||
[admin@R2] > | |||
/interface vlan | /interface vlan | ||
add interface=ether1 name=vlan110-ether1 vlan-id=110 | add interface=ether1 name=vlan110-ether1 vlan-id=110 | ||
| Line 36: | Line 51: | ||
add bridge=vlan220-bridge interface=vlan220-ether1 | add bridge=vlan220-bridge interface=vlan220-ether1 | ||
add bridge=vlan220-bridge interface=wlan2 | add bridge=vlan220-bridge interface=wlan2 | ||
</pre> | </pre> | ||
* R3 | ===Router3 configuration=== | ||
* Add ip address on wlan1 interface. | |||
* Create wireless security-profile compatible with R2 wlan1. | |||
<pre> | |||
[admin@R3] > | |||
/ip address | |||
add address=192.168.1.3/24 interface=wlan1 network=192.168.1.0 | |||
/interface wireless | /interface wireless | ||
set [ find default-name=wlan1 ] disabled=no security-profile=vlan110 wireless-protocol=802.11 | set [ find default-name=wlan1 ] disabled=no security-profile=vlan110 wireless-protocol=802.11 | ||
</pre> | </pre> | ||
* R4 | ===Router4 configuration=== | ||
* Add ip address on wlan1 interface. | |||
* Create wireless security-profile compatible with R2 wlan2. | |||
<pre> | |||
[admin@R4] > | |||
/ip address | |||
add address=172.168.1.4/24 interface=wlan1 network=192.168.1.0 | |||
/interface wireless | /interface wireless | ||
set [ find default-name=wlan1 ] disabled=no security-profile=vlan220 wireless-protocol=802.11 | set [ find default-name=wlan1 ] disabled=no security-profile=vlan220 wireless-protocol=802.11 | ||
</pre> | </pre> | ||
Revision as of 17:25, 9 January 2017
Summary
abc.
Example 1
Router1 configuration
- Add necessary VLAN interfaces on ethernet interface to make it as a VLAN trunk port. Add ip addresses on VLAN interfaces.
[admin@R1] > /interface vlan add interface=ether1 name=vlan110 vlan-id=110 add interface=ether1 name=vlan220 vlan-id=220 /ip address add address=192.168.1.1/24 interface=vlan110 network=192.168.1.0 add address=172.168.1.1/24 interface=vlan220 network=172.168.1.0
Router2 configuration
- Add VirtualAP under wlan1 interface. ( Also create wireless security-profiles for wlan1 and wlan2)
[admin@R2] >
/interface wireless
set [ find default-name=wlan1 ] disabled=no mode=ap-bridge security-profile=vlan110 ssid=vlan110 vlan-id=110 wireless-protocol=802.11
add disabled=no keepalive-frames=disabled master-interface=wlan1 multicast-buffering=disabled name=wlan2 \
security-profile=vlan220 ssid=vlan220 vlan-id=220 wds-cost-range=0 wds-default-cost=0
- Add necessary VLAN interfaces on ethernet interface to make it as a VLAN trunk port.
- Add bridges for each VLAN.
- Add VLAN interfaces to their corresponding bridges and wireless interfaces to each bridge.
[admin@R2] > /interface vlan add interface=ether1 name=vlan110-ether1 vlan-id=110 add interface=ether1 name=vlan220-ether1 vlan-id=220 /interface bridge add name=bridge-vlan110 add name=vlan220-bridge /interface bridge port add bridge=bridge-vlan110 interface=vlan110-ether1 add bridge=bridge-vlan110 interface=wlan1 add bridge=vlan220-bridge interface=vlan220-ether1 add bridge=vlan220-bridge interface=wlan2
Router3 configuration
- Add ip address on wlan1 interface.
- Create wireless security-profile compatible with R2 wlan1.
[admin@R3] > /ip address add address=192.168.1.3/24 interface=wlan1 network=192.168.1.0 /interface wireless set [ find default-name=wlan1 ] disabled=no security-profile=vlan110 wireless-protocol=802.11
Router4 configuration
- Add ip address on wlan1 interface.
- Create wireless security-profile compatible with R2 wlan2.
[admin@R4] > /ip address add address=172.168.1.4/24 interface=wlan1 network=192.168.1.0 /interface wireless set [ find default-name=wlan1 ] disabled=no security-profile=vlan220 wireless-protocol=802.11
Example 2
[ Top | Back to Content ]