Manual:Interface/Lora: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
← Older editNewer edit →
No edit summary
No edit summary
Line 3: Line 3:
<b>Package:</b> <code>system</code>,<code>lora</code>
<b>Package:</b> <code>system</code>,<code>lora</code>
</p>
</p>
<p>Every RouterBOARD with a miniPCI-e interface (with connected USB lines) could be turn in LoRaWAN gateway by installation of <b>R11e-LoRa8</b> or <b>R11e-LoRa9</b> card. </p>
<p>Every RouterBOARD with a miniPCI-e interface which supports LTE modems could also be turn in LoRaWAN gateway by installation of <b>R11e-LoRa8</b> or <b>R11e-LoRa9</b> card. </p>
{{Warning | RouterOS doesn`t support 3rd party LoRaWAN gateway cards}}
{{Warning | RouterOS doesn`t support 3rd party LoRaWAN gateway cards}}


Line 99: Line 99:


==Channels==
==Channels==
<p id="shbox">
<b>Sub-menu:</b> <code>/lora channels</code>
</p>
{{Mr-arg-table-h
|prop=Property
|desc=Description
}}
{{Mr-arg-table
|arg=bandwidth
|type=7.8_kHz {{!}} 15.6_kHz {{!}} 31.2_kHz {{!}} 62.5_kHz {{!}} 125_kHz {{!}} 250_kHz {{!}} 500_kHz
|default=125_kHz
|desc=Bandwidth of specific channel, pre-defined when any of channel-plan preset is used, but could be manually changed when channel-plan is set to custom.
}}
{{Mr-arg-table
|arg=disabled
|type= yes {{!}} no
|default=no
|desc=Whether specific channel is disabled.
}}
{{Mr-arg-table
|arg=freq-off
|type=integer [Hz]
|default=
|desc=Channel frequency offset against radio central frequency, it makes possible to adjust channel frequencies so that channels doesn`t overlap.
}}
{{Mr-arg-table
|arg=radio
|type= radio0 {{!}} radio1
|default=
|desc=Defines which radio uses selected channel.
}}
{{Mr-arg-table-end
|arg=spread-factor
|type=SF7 {{!}} SF8 {{!}} SF9 {{!}} SF10 {{!}} SF11 {{!}} SF12
|default=
|desc=Defines the Spread Factor for a channel with type=LoRa. Lower Spread Factor means higher data rate.
}}
==Radios==
<p id="shbox">
<b>Sub-menu:</b> <code>/lora radios</code>
</p>
{{Mr-arg-table-h
|prop=Property
|desc=Description
}}
{{Mr-arg-table
|arg=center-freq
|type=integer [0..4294967295Hz]
|default=
|desc=Defines radio central frequency, default value depends on selected channel-plan.
}}
{{Mr-arg-table
|arg=disabled
|type= yes {{!}} no
|default=no
|desc=Whether radio is disabled.
}}
{{Mr-arg-table
|arg=rssi-off
|type=integer
|default=-162
|desc=Used to calculate precise RSSI level of received packets
}}
{{Mr-arg-table
|arg=tx-enabled
|type= yes {{!}} no
|default=
|desc=Whether radio is used for transmission. By default one of radios has set tx-enabled=yes and the other has set tx-enabled=no.
}}
{{Mr-arg-table
|arg=tx-freq-min
|type=integer [0..4294967295Hz]
|default=
|desc=
}}
{{Mr-arg-table-end
|arg=tx-freq-max
|type=integer [0..4294967295Hz]
|default=
|desc=
}}
==Servers==
<p id="shbox">
<b>Sub-menu:</b> <code>/lora servers</code>
</p>

Revision as of 13:41, 26 September 2019

Summary

Package: system,lora

Every RouterBOARD with a miniPCI-e interface which supports LTE modems could also be turn in LoRaWAN gateway by installation of R11e-LoRa8 or R11e-LoRa9 card.

Warning: RouterOS doesn`t support 3rd party LoRaWAN gateway cards


Properties

Sub-menu: /lora

Property Description
antenna-gain (integer [-128..127]; Default: 0) Antenna gain in dBi.
channel-plan (as-923 | au-915 | custom | eu-868 | in-865 | kr-920 | ru-864 | us-915; Default: eu-868) Frequency plans for various regions.
disabled (yes | no; Default: yes) Whether LoRaWAN gateway is disabled.
forward (crc-disabled | crc-error | crc-valid; Default: crc-valid,crc-error) Defines what kind of packets should be forwarded to Network server:
  • crc-disabled - forward packets which CRC code isn`t checked
  • crc-error - forward packets with incorrect CRC code
  • crc-valid - forward valid packets with correct CRC.
lbt-enabled (yes | no; Default: no) Whether gateway should use LBT (Listen Before Talk) protocol.
listen-time (integer [0us..4294967295us]; Default: 5000us) Time in microseconds to track RSSI before TX (used when lbt-enabled=yes).
name (string; Default: ) Name of LoRaWAN gateway.
network (private | public; Default: public) Whether sync word should be used (network=private) or shouldn`t (network=public).
rssi-threshold (integer [-32,768 .. 32,767]; Default: -65dB) RSSI value to determine whether forwarder may use specific channel to talk. If RSSI value is below rssi-threshold, channel could be used (used when lbt-enabled=yes).
servers (list of string; Default: ) Name or names of servers from /lora servers.
src-address (IP; Default: ) Specifies uplink packet source address if necessary (address should match an address configured on the RB).


Channels

Sub-menu: /lora channels

Property Description
bandwidth (7.8_kHz | 15.6_kHz | 31.2_kHz | 62.5_kHz | 125_kHz | 250_kHz | 500_kHz; Default: 125_kHz) Bandwidth of specific channel, pre-defined when any of channel-plan preset is used, but could be manually changed when channel-plan is set to custom.
disabled (yes | no; Default: no) Whether specific channel is disabled.
freq-off (integer [Hz]; Default: ) Channel frequency offset against radio central frequency, it makes possible to adjust channel frequencies so that channels doesn`t overlap.
radio (radio0 | radio1; Default: ) Defines which radio uses selected channel.
spread-factor (SF7 | SF8 | SF9 | SF10 | SF11 | SF12; Default: ) Defines the Spread Factor for a channel with type=LoRa. Lower Spread Factor means higher data rate.


Radios

Sub-menu: /lora radios

Property Description
center-freq (integer [0..4294967295Hz]; Default: ) Defines radio central frequency, default value depends on selected channel-plan.
disabled (yes | no; Default: no) Whether radio is disabled.
rssi-off (integer; Default: -162) Used to calculate precise RSSI level of received packets
tx-enabled (yes | no; Default: ) Whether radio is used for transmission. By default one of radios has set tx-enabled=yes and the other has set tx-enabled=no.
tx-freq-min (integer [0..4294967295Hz]; Default: )
tx-freq-max (integer [0..4294967295Hz]; Default: )


Servers

Sub-menu: /lora servers

Retrieved from "https://wiki.mikrotik.com/index.php?title=Manual:Interface/Lora&oldid=33577"