Manual:MPLS L2VPN vs Juniper
Summary
This article describes the basic setup of Point-to-Point L2VPN with Juniper J-series routers.
Configuration
Consider network setup as ilustrated below:
We will be setting up the layer 2 connection between the CE and PE routers as well as the MPLS and L2VPN between PE routers. The layer 2 link between the CE and PE routers will be an Ethernet VLAN circuit.
Set up VLANs
CE1 and CE2 routers:
PE1 RouterOS:
PE2 JunOS:
Set up OSPF and LDP
PE1 RouterOS:
P RouterOS:
PE2 JunOS:
Set up L2VPN
PE1 RouterOS:
PE2 Junos:
Verify Operation
PE1:
PE2: