API command notes

Summary

This page contains information about details of API commands, examples

Commands

monitor-traffic

Details

• Basic command syntax:

/interface/monitor-traffic
=interface=<id1>,<id2>,<id3>

• Output: replies will be sent in succession with in statistics about interface in order of IDs given in command. So, first re! will be for <id1>, second for <id2>

• Duration: command runs until interrupted with /cancel

• planned changes: it is planned to add item identification to replies.

Example

• Command

/interface/monitor-traffic
=interface=ether1-Local,ether3-Out

• Return

!re
=rx-packets-per-second=4
=rx-drops-per-second=0
=rx-errors-per-second=0
=rx-bits-per-second=8531
=tx-packets-per-second=3
=tx-drops-per-second=0
=tx-errors-per-second=0
=tx-bits-per-second=11266

!re
=rx-packets-per-second=8
=rx-drops-per-second=0
=rx-errors-per-second=0
=rx-bits-per-second=14179
=tx-packets-per-second=4
=tx-drops-per-second=0
=tx-errors-per-second=0
=tx-bits-per-second=8591

!re
=rx-packets-per-second=4
=rx-drops-per-second=0
=rx-errors-per-second=0
=rx-bits-per-second=2312
=tx-packets-per-second=2
=tx-drops-per-second=0
=tx-errors-per-second=0
=tx-bits-per-second=3039

!re
=rx-packets-per-second=5
=rx-drops-per-second=0
=rx-errors-per-second=0
=rx-bits-per-second=4217
=tx-packets-per-second=1
=tx-drops-per-second=0 
=tx-errors-per-second=0
=tx-bits-per-second=635

See also

API