Manual:MPLS

Sub Categories

List of reference sub-pages	Case studies	List of examples
Interface vpls traffic-eng MPLS ldp traffic-eng	General MPLS Overview and RouterOS MPLS Implementation Status EXP bit behaviour L2MTU Layer2 VPN LDP and LDP based VPLS BGP based VPLS Cisco style VPLS VPLS Control Word Layer3 VPN Virtual Routing and Forwarding (VRF) OSPF as PE-CE routing protocol EBGP as PE-CE routing protocol Traffic Engineering TE Tunnels TE Tunnel Bandwidth Control	General MPLS over PPPoE Layer2 VPN Layer3 VPN A complete Layer-3 MPLS VPN example VRF Route Leaking Internet access from VRF Internet access from VRF with NAT Traffic Engineering Simple TE configuration TE tunnels for VPLS

Summary

MikroTik RouterOS supports MPLS. All MikroTik RouterBOARD hardware products support MPLS.

General Porperties

Property	Description
dynamic-label-range (range of integer[16..1048575]; Default: 16-1048575)	Range of Label numbers used for dynamic allocation. First 16 labels are reserved for special purposes (as defined in RFC). If you intend to configure labels statically then adjust dynamic default range not to include numbers that will be used in static configuration.
propagate-ttl (yes | no; Default: yes)	Whether to copy TTL values from IP header to MPLS header. If this option is set to no then hops inside MPLS cloud will be invisible from traceroutes.

Remote Bindings

[ Top | Back to Content ]