3G configuration with Tele2

From MikroTik Wiki
Revision as of 13:24, 12 January 2012 by Normis (talk | contribs) (Created page with "This example shows how to configure internet connection over 3G at the Latvian Tele2 mobile operator: PPP client: <pre> /interface ppp-client add add-default-route=yes allow=pa...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This example shows how to configure internet connection over 3G at the Latvian Tele2 mobile operator:

PPP client: 

/interface ppp-client
add add-default-route=yes allow=pap,chap,mschap1,mschap2
apn=mobileinternet.tele2.lv data-channel=0 dial-command=ATDT
dial-on-demand=no disabled=no info-channel=3 \
   keepalive-timeout=10 max-mru=1500 max-mtu=1500
modem-init="AT+CGDCONT=1,\"IP\",\"mobileinternet.tele2.lv\""
mrru=disabled name=Tele2_internet_ppp_con null-modem=no \
   password=wap phone=*99# pin="" port=usb1 profile=Tele2
use-peer-dns=yes user=wap

PPP profile: 


add change-tcp-mss=default name=Tele2 only-one=default
remote-address=130.244.196.90 remote-ipv6-prefix-pool=none
use-compression=default \
   use-encryption=default use-ipv6=yes use-mpls=default
use-vj-compression=default
Retrieved from "https://wiki.mikrotik.com/index.php?title=3G_configuration_with_Tele2&oldid=22952"