Manual:IP/SMB
Jump to navigation
Jump to search
Summary
Sub-menu: /ip smb
SMB server provides windows sharing access to configured folders of the router.
Server settings
| Property | Description |
|---|---|
| enabled (yes | no; Default: no) | If SMB service is enabled |
| domain (string; Default: MSHOME) | Name of windows workgroup |
| allow-guests (yes | no; Default: yes) | If SMB guest user is allowed to access created shares |
| interface (string; Default: all) | list of interfaces that SMB service is available on. |
Sub-menu: /ip smb share
To set up SMB share users have to specify what folders can be accessed by the router. If folder does not exist it will be created automatically for use by created share.
| Property | Description |
|---|---|
| disabled (yes | no; Default: no) | If SMB share is accessible to any configured SBM user |
| max-sessions (number; Default: 10) | How many SMB simultaneous connections are allowed to shared folder |
| name (string; Default: ) | Name of the SMB share |
| directory (string; Default: ) | What folder should be assigned to the SMB share. If left empty value of name argument will be used from the root folder. |
User setup
Sub-menu: /ip smb share
Set up users that can access SMB shares of the router.
| Property | Description |
|---|---|
| disabled (yes | no; Default: no) | If SMB service is enabled |
| name (string; Default: ) | login name of the SMB service user |
| password (string; Default: ) | password for SMB user to connect to SMB service |
| read-only (yes | no; Default: yes) | Sets if user has only read-only rights when accessing shares or full access. |
Example
To make some RouterOS folder available through SMB service follow these steps:
- create user:
/ip smb user add read-only=no name=mtuser password=mtpasswd
- add shared folder
/ip smb share add name=backup
- enable SMB service
/ip smb set enabled=yes
Now check for results:
Check general service settings:
/ip smb print
[admin@MikroTik] /ip smb> print
enabled: yes
domain: MSHOME
comment: MikrotikSMB
allow-guests: yes
interfaces: all
SMB user settings:
/ip smb users print
[admin@MikroTik] /ip smb> users print Flags: * - default, X - disabled # NAME PASSWORD READ-ONLY 0 * guest yes 1 mtuser mtpasswd no
And finally SMB shares settings:
/ip smb shares print
[admin@MikroTik] /ip smb> shares print
Flags: X - disabled, I - inactive, * - default
# NAME DIRECTORY MAX-SESSIONS
0 * ;;; default share
pub /pub 10
1 backup /backup 10
Now additional configuration changes can be done, like disabling default user and share etc.