Manual:PoE-Out
Summary
this page describes what boards can be powered using RB750UP and OmniTik UPA. More about features read in PoE out manual
Powered devices
Table contain information on what devices can be powered using RB750UP and OmniTik UPA as power source for PoE
Polarity: standard - blue pair positive, brown pair negative; reversed - blue pair negative , brown pair positive, any - either standard or reversed.
| Device | forced-on | auto-on | polarity |
|---|---|---|---|
| RouterBOARD RB433GL | yes | yes | any |
| RouterBOARD RB450G | yes | yes | any |
| RouterBOARD RB450 | yes | yes | standard |
| RouterBOARD RB433AH | yes | yes | standard |
| Motorolla Canopy | yes | yes | reversed |
| RouterBOARD RB435G | yes | yes | any |
| RouterBOARD RB493AH | yes | yes | standard |
| RouterBOARD RB532 | yes | yes | standard |
| Ubiquity LOCO900 | yes | yes | standard |
| Ubiquity Bullet M2 | yes | yes | standard |
| Ubiquity Bullet M5 | yes | yes | standard |
| Ubiquity NanoStation 2N | yes | yes | standard |
| Ubiquity NanoStation M365 | yes | yes | standard |
| Ubiquity UniFi AP | yes | yes | standard |
| Ubiquity UniFi AP long range | yes | yes | standard |
Wiring
If you want to power device that supports only reverse polarity using 'RB750UP and OmniTik UPA you have to make special cable that will swap required wires, thus enabling you to power these devices.
On one end you have to have standard RJ45 T568B wiring (orange striped, orange, green striped, blue, blue striped, green, brown striped, brown) and on other and has to have blue and brown pair swapped resulting in (orange striped, orange, green striped, brown, brown striped, green, blue striped, blue)