Manual:Performance Testing with Traffic Generator
Summary
RB1100AHx2 Test setup
Routing Performance Testing
DUT Config
/ip address add address=1.1.1.254/24 interface=ether1 network=1.1.1.0 add address=2.2.2.254/24 interface=ether6 network=2.2.2.0 add address=3.3.3.254/24 interface=ether11 network=3.3.3.0
Traffic Generator Config
/ip address add address=1.1.1.1/24 interface=ether1 network=1.1.1.0 add address=2.2.2.2/24 interface=ether6 network=2.2.2.0 add address=3.3.3.3/24 interface=ether11 network=3.3.3.0 /tool traffic-generator packet-template add name=r12 header-stack=mac,ip,udp ip-gateway=1.1.1.254 ip-dst=2.2.2.2 add name=r13 header-stack=mac,ip,udp ip-gateway=1.1.1.254 ip-dst=3.3.3.3 add name=r21 header-stack=mac,ip,udp ip-gateway=2.2.2.254 ip-dst=1.1.1.1 add name=r23 header-stack=mac,ip,udp ip-gateway=2.2.2.254 ip-dst=3.3.3.3 add name=r32 header-stack=mac,ip,udp ip-gateway=3.3.3.254 ip-dst=2.2.2.2 add name=r31 header-stack=mac,ip,udp ip-gateway=3.3.3.254 ip-dst=1.1.1.1
Note: To force MAC address re-discovery (on device/configuration change, just apply emply "set" command to necessary packet-templates)
Running Tests
/tool traffic-generator quick tx-template=r12,r13,r21,r23,r31,r32 packet-size=60 mbps=300
We are specifying 60byte packet in traffic generator to get 64 byte packet on ethernet.
Do the same with different packet sizes:
/tool traffic-generator quick tx-template=r12,r13,r21,r23,r31,r32 packet-size=508 mbps=500 /tool traffic-generator quick tx-template=r12,r13,r21,r23,r31,r32 packet-size=1514 mbps=500
Note: mind that speed in quick mode is specified per stream, so if you have two streams per port, you need to send 1/2 of traffic per stream