MikroTik SFP module compatibility table

This document clarifies compatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware.

Model	S-RJ01	S-85DLC05D	S-31DLC20D	S-3553LC20D	S+85DLC03D	S+31DLC10D	S+2332LC10D	SFP+ 1m/3m DAC
CCR1036-12G-4S	+	+	+	+	+	+	+	+
CCR1036-8G-2S+	-	+	+	+	+	+	+	+
CCR1016-12S-1S+	+ *	+ *	+ *	+ *	+	+	+	+
CCR1009-8G-1S-1S+	+ *	+	+	+	+	+	+	+
CRS125-24G-1S	+	+	+	+	+	+	+	+
CRS226-24G-2S+	-	+	+	+	+	+	+	+
CRS212-1G-10S-1S+	+ *	+ *	+ *	+ *	+	+	+	+
CRS210-8G-2S+	- *	+	+	+	+	+	+	+
CRS109-8G-1S	+	+	+	+	+	+	+	+
RB260GS	+	+	+	+	+	+	+	+
RB2011	+	+	+	+	+	+	+	+
RB922/921	+	+	+	+	+	+	+	+
RB953GS	+	+	+	+	+	+	+	+
FTC	+	+	+	+	+	+	+	+

Note: * CCR1009-8G-1S-1S+ ... SFP+1 interface does not support rj45 SFP modules. SFP1 interface however will work just fine with this type of transceiver.

Note: * CCR1016-12S-1S+ ... CRS212-1G-10S-1S+ - SFP+1 interface does not work on any other link speed than 10G.

Note: * CRS226 / CRS210 ... Only SFP+1 interface supports SFP 1.25G transveicers, SFP+2 works only with 10G transceivers/links.