MikroTik SFP module compatibility table

From MikroTik Wiki
Revision as of 15:23, 11 November 2015 by Krisjanis (talk | contribs)
Jump to navigation Jump to search

This document clarifies compatibility between MikroTik made SFP modules and MikroTik RouterBOARD hardware.

Model S-GPON-ONU S-RJ01 S-85DLC05D S-31DLC20D S-3553LC20D S+85DLC03D S+31DLC10D S+2332LC10D SFP+ 1m/3m DAC
CCR1072-1G-8S+ + - + + + + + + +
CCR1036-12G-4S + + + + + + + + +
CCR1036-8G-2S+ + + + + + + + + +
CCR1016-12S-1S+ + + * + * + * + * + + + +
CCR1009-8G-1S-1S+ + + * + + + + + + +
CRS125-24G-1S + + + + + + + + +
CRS226-24G-2S+ + - + * + * + * + + + +
CRS212-1G-10S-1S+ + + * + * + * + * + + + +
CRS210-8G-2S+ + - + * + * + * + + + +
CRS112-8G-4S + + + + + + + + +
CRS109-8G-1S + + + + + + + + +
RB260GS + + + + + + + + +
RB2011 + + + + + + + + +
RB922/921 + + + + + + + + +
RB953GS + + + + + + + + +
FTC + + + + + + + + +
Legend:
Color codes: Not supported Check notes below


  • NOTES:
    • CCR1009-8G-1S-1S+ -- SFP+1 interface does not support rj45 SFP modules. SFP1 interface however will work just fine with this type of transceiver.
    • CCR1016-12S-1S+ / CRS212-1G-10S-1S+ -- SFP+1 interface does not work on any other link speed than 10G (does not support 1.25G fiber optic transceivers)
    • CRS226 / CRS210 -- Only SFP+1 interface supports SFP 1.25G fiber optic transceivers, SFP+2 works only with 10G transceivers/links.

S-RJ01

Table that states in what link rates if mounted in specific MikroTik devices S-RJ01 module will be able to work.

Model 1000 100 10
RB922 + + +
RB921 + + +
RB953 +/+ +/- +/-
RB2011 + - -
FTC + - -
CRS112 + + +
CRS125/CRS109 + + +
CRS212 + + +
CRS226/CRS210 - - -
CCR1009 +/+ +/+ +/+
CCR1016-12S-1S+ + + +
CCR1036-12G-4S + + +
CCR1036-8G-2S+ + + +
CCR1072-1G-8S+ - - -

Note: CCR1072 compatibility with S-RJ01 temporally set to "-" as there were some issues with it in ROS release up to v6.32.2 andv6.33rc builds.


Notes:

  • Rate works fine: +
  • Rate does not work: -
  • RB953: SFP2/SFP1
  • CCR1009: SFP+/SFP

Note: All results taken from test scenarios where SFP or SFPplus interface is configured in auto-negation enabled and devices version no lower than RouterOS v6.32


Retrieved from "https://wiki.mikrotik.com/index.php?title=MikroTik_SFP_module_compatibility_table&oldid=27534"