Bandwidth Control in a Service Provider network

Bandwidth Control Scenarios vs. Network Topology

The installation of Bandwidth Control Device(s) within the network depends upon the network layout. As a general rule, you want to put the control devices (BW control, firewall, etc.) at a Trust Boundary. In virtually any network, Trust Boundaries exist at the Edge and the Border of the network. In a Service Provider's network, this is where the customer connects and where the service provider connects to the rest of the Internet.

The more complex the network topology, the more creative you'll have to be in order to implement Bandwidth Control & QOS. I'll discuss three different network topologies and strategies for how to implement network-wide Bandwidth Control and Quality of Service.

Additional complexity arises in heterogeneous network architectures. If you're using MikroTik devices along with other vendors' equipment such as Cisco, Adtran, Nortel, etc., you need to ensure that your QOS scheme interoperates between the different devices.

This is a

new set

of stuff

Links / Supporting Documents

• Queue_Tree_with_more_than_two_interfaces
• MikroTik RouterOS Workshop - QOS Best Practice

Terminology

Access / Aggregation Device	Devices that connect the End User to Your network. Probably some sort of "point-to-multipoint" thing such as: miniPCI card in the EdgeRouter (either WAP or Ethernet ports) Wireless Access Point, separate from EdgeRouter Router with T1/T3/OC3s, etc. DSLAM (Frame Relay / ATM switch) Ethernet switch or bridge Analog/ISDN modem bank VPN concentrator
Backhaul / Backbone	Links between PoPs and other PoPs or Central Office(s)
Backhaul / Backbone Device(s)	Devices that route or bridge IP traffic bewteen PoPs and Central Office(s).
Bandwidth Control	The act of prioritizing and rate limiting IP traffic.
Bandwidth Control Device	A Mikrotik router performing Classification, Marking, Prioritization, and Rate Limiting on IP traffic.
Border	The line between You and The Internet (your upstream internet providers and/or peers). The boundary between two different Autonomous Systems.
Border Router(s)	Device(s) connecting Your Network to The Internet (Your upstream providers or peers). In single-homed networks, the router connecting to upstream internet provider. Could run external BGP or have default route with next hop of upstream provider. In multi-homed networks, border routers most likely run external BGP For most IGP protocols like OSPF or EIGRP, this is the origination point(s) of the default route which gets distributed to the network.
Bridged interface	one or more physical interfaces that are linked together to form a single logical interface that can be used as a Bandwidth Control upload or download interface.
Central Office	Physical location(s) where your network receives a connection from upstream providers and/or peers.
Class	A bandwidth control grouping that defines a maximum upload and/or download speeds.
Download	Traffic flowing FROM the internet TO the End User
Download interface	The interface on the Bandwidth Control Device that is or connects to the Access Device.
Edge	The line between "you" (the network where bandwidth control is being deployed, probably the reader of this document!) and the End User of "your" service.
EdgeRouter	A router placed as close as possible to the edge of the network. Probably placed between Backhaul device and Access device
End User / Customer / Client	The entity under bandwidth control. In general, this refers to the IP Address(es) assigned to the actual entity. For an ISP, this is a customer For a school, this could be faculty, staff, or student. For typical businesses & government, this is employees
Upload	Traffic flowing FROM the End User TO the internet
Upload interface	The interface on the Bandwidth Control Device that is or connects to the Backbone device
You/Your Network	The entity performing bandwidth control, Most likely the reader of this document! From the End User's perspective, this could be the ISP, the school, or the business/government.