Dynamic DNS Update Script for Hurricane Electric DNS

This script will update the IPv4 address on (Hurricane Electric DNS service)

It uses the fetch command with the url= parameter. Check that your version of RouterOS -> /tool fetch supports this option.

It uses the following URL to supply update information:

• For auto IP detection:

http://dyn.example.com:password@dyn.dns.he.net/nic/update?hostname=dyn.example.com

• For manually setting the IP address:

http://dyn.example.com:password@dyn.dns.he.net/nic/update?hostname=dyn.example.com&myip=192.168.0.1

For more information, see this link: [1]

The script:

# Update Hurricane Electric DDNS IPv4 address


:local ddnshost "<dyndnshost>"
:local key "key"
:local updatehost "dyn.dns.he.net"
:local WANinterface "<if>"
:local outputfile ("HE_DDNS" . ".txt")

# Internal processing below...
# ----------------------------------
:local ipv4addr

# Get WAN interface IP address
:set ipv4addr [/ip address get [/ip address find interface=$WANinterface] address]
:set ipv4addr [:pick [:tostr $ipv4addr] 0 [:find [:tostr $ipv4addr] "/"]]

:if ([:len $ipv4addr] = 0) do={
   :log error ("Could not get IP for interface " . $WANinterface)
   :error ("Could not get IP for interface " . $WANinterface)
}

:log info ("Updating DDNS IPv4 address" . " Client IPv4 address to new IP " . $ipv4addr . "...")

/tool fetch url="http://$ddnshost:$key@$updatehost/nic/update?hostname=$ddnshost&myip=$ipv4addr" dst-path=$outputfile
                              
:log info ([/file get ($outputfile) contents])
/file remove ($outputfile)