Failover Scripting

From MikroTik Wiki

Revision as of 14:50, 19 September 2012 by Tomaskir (talk | contribs) (Created page with "This is an easy to use script for your failover needs. It works by pinging any IP address you specify using the connections you tell it to. If a ping failure is detected in incr...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

This is an easy to use script for your failover needs.

It works by pinging any IP address you specify using the connections you tell it to. If a ping failure is detected in increases a route's distance in the routing table by an ammount you specify.

WORK IN PROGRESS.

Retrieved from "https://wiki.mikrotik.com/index.php?title=Failover_Scripting&oldid=24196"