GPON module basic test examples

From MikroTik Wiki
Revision as of 09:21, 10 January 2017 by Krisjanis (talk | contribs) (→‎Adtran TA-5000))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

ZTE quick basic test configuration example

  • gpon-olt_0/14/1 GPON port
  • gei_0/1/1 ethernet port
configure terminal
gpon
exit
vlan database
no vlan 129-2900
vlan 2601
exit
interface gpon-olt_1/2/1
no onu 1
onu 1 type ZTE-F622 sn (SERIALNR) vport-mode gemport
exit

/* create profile, 1G bandwidth */
gpon
profile tcont fixed1G type 1 fixed 1000000
exit

interface gpon-onu_1/2/1:1
vport-mode gemport def-map-type 1:1
tcont 1 name 1 allocid 256 profile fixed1G
tcont 1 gap mode3
gemport 1 name Gem1 portid 129 unicast tcont 1 dir both queue 1
switchport mode hybrid vport 1
switchport vlan 2601 tag
switchport default vlan 2900

exit
interface gei_1/2/1
switchport mode hybrid
switchport vlan 2601 tag
switchport default vlan 2900
exit

pon-onu-mng gpon-onu_1/2/1:1
gemport 1
exit


Huawei quick basic test configuration example

  • TEST - server behind 0/18 0 interface.
  • DUT - behind 0/0 3 ont 0
############# Configure DBA profile for ONT ################ 

MA5680T(config)#dba-profile add profile-id 10 profile-name T4-1G type4 max 1024000 

############# Configure line profile and bridgeport to interwork for ONT ################ 

MA5680T(config)#ont-lineprofile gpon profile-id 10 profile-name transparent  

MA5680T(config-gpon-lineprofile-10)#tcont 1 dba-profile-id 10 

MA5680T(config-gpon-lineprofile-10)#gem add 0 eth tcont 1

MA5680T(config-gpon-lineprofile-10)#mapping-mode port

MA5680T(config-gpon-lineprofile-10)#gem mapping 0 0 eth 1 

MA5680T(config-gpon-lineprofile-10)#commit 

MA5680T(config-gpon-lineprofile-10)#quit

############# Configure service profile and bridgeport to UNI port for ONT ################ 

MA5680T(config)#ont-srvprofile gpon profile-id 10 profile-name transparent 

MA5680T(config-gpon-srvprofile-10)#ont-port eth 1 pots 0 

MA5680T(config-gpon-srvprofile-10)#port vlan eth 1 transparent 

MA5680T(config-gpon-srvprofile-10)#commit 

MA5680T(config-gpon-srvprofile-10)#quit

############# register ONT with Huawei OLT ################ 

MA5680T(config)#interface gpon 0/1     // enter GPON card interface

MA5680T(config-if-gpon-0/1)#port 4 ont-auto-find enable  

MA5680T(config)#display ont autofind all gpon 

MA5680T(config-if-gpon-0/1)#ont add 3 0 sn-auth (SERIALNR) omci ont-lineprofile-id 10 ont-srvprofile-id 10 

############# Configure Vlan 100 from ONT to OLT gigabit port  ################ 

MA5680T(config)#service-port vlan 100 gpon 0/0/3 ont 0 gemport 0 multi-service user-vlan 100 

############# Add VLAN 100 to OLT gigaport  ################ 

MA5680T(config)#port vlan 100 0/18 0     


Adtran TA-5000)

  • To verify your Adtran TA-5000 is able to detect if the Mikrotik SFP GPON module is connected to your GPON network
  1. 1 Telnet to your Adtran TA-5000 - (enable when you login)
  2. 2 type in "show run" and look for information which appears like this:
    !
    remote-device ont 2@1/20/1.gpon
      mac-spoofing-allowed enable
      serial-number "MKTK0c150621"
      no shutdown
    !

Note - the serial-number "MKTK0c150621" indicates the Adtran TA-5000 does see the Mikrotik SFP GPON module.

  1. 3 To view additional information - type in the following

show remote-device ont 2@1/20/1.gpon note: Replace the 2@1/20/1.gpon part of the command with your configuration You should something similar to the following:

TA5000-3#show remote-device ont 2@1/20/1.gpon remote-device ont 2@1/20/1.gpon is IS and up

 Uptime                          : 0 days, 04 hours, 46 minutes, 20 seconds
 Description                     : MKTK0c150621_Mikrotik-MKTK0c1506
 Activated Serial Number         : MKTK0c150621
 CLEI                            :
 Software Version                : <forced-A>
 Inactive Software Version       : <forced-B>
 Boot Software Version           : na
 Upgrade Status                  : Upgrade Completed
 Part Number                     : 2.7-D-P5
 Product Name                    :
 OLT Rx Power (RSSI)         dBm : -10.5
 ONT Rx Power                dBm : -11.7
 ONT Tx Power                dBm : 2.0
 Upstream BIP                    : 52413
 Downstream BIP                  : 69
 RDI                             : 0
 RX Ploam CRC Error              : na
 US Good DBRu                    : na
 US Bad DBRu                     : na
 Equalization Delay          bit : 300870
 Fiber Distance                m : 834
 ACS Server Profile              :
 ACS Username                    :
 Management Mac Address          : 00:00:00:00:00:00
 Last Error                      : Error: Management IP not suppoted in this ONT

I will later edit and add more information for how to configure the Adtran and Mikrotik (when I figure it out). North Idaho Tom Jones

EDIT December 30 2016 by "TomjNorthIdaho"

I am now able to confirm the that I was able to get a Mikrotik GPON SFP module (inserted into a Mikrotik 2011UiAS-2HnD running 6.37.3) to work in my ISP GPON network. My head-end to the GPON networks are Adtran TA-5000 units (System Release 08.05.01.02).

I suspect there may be more than one way to configure everything... Here is what I did:

- - - (Simple bridge) - On the Head-End that terminates all your customer GPON networks/devices, you need to configure the head-end as if you are connecting a simple bridging ONT.  Do not configure Virtual Ethernets.
- - - (Simple bridge) - On the Mikrotik with the Mikrotik GPON SFP module inserted; configure the sfp1 interface the same way you would configure a normal Ethernet.  Do not use vlan tagging (802.1q).

This is a CLI show run from my Adtran TA-5000 showing the parts of the Adtran configuration to make the Mikrotik GPON module work:

========================================
========================================
!
remote-device ont 2@1/20/1.gpon
  description "Mikrotik--2@1/20/1--MKTK0c150621"
  mac-spoofing-allowed enable
  serial-number "MKTK0c150621"
  no shutdown
!

!
evc "Data"
  s-tag 246
  connect men-port default-ethernet
  mac-switched
  no preserve-ce-vlan
  no shutdown
!

!
evc "Data"
  s-tag 246
  connect men-port default-ethernet
  mac-switched
  no preserve-ce-vlan
  no shutdown
!

!
interface gpon 1/20/1
  activation-mode auto-activate
  resource allocation-mode 32 32
  thresholds total-min-rate 2488000
  no shutdown
!

!
shaper "Download-MKTK0c150621" 1/20
  per remote-device 2@1/20/1.gpon queue 0-7
  rate 999999
  gpon channel assured-bandwidth 0
  gpon channel fixed-bandwidth 0
  min-rate 0
  no shutdown
!
!
shaper "Upload-MKTK0c150621" 2@1/20/1.gpon
  per interface gpon 2/0/1@1/20/1.gpon channel 1
  rate 999999
  gpon channel assured-bandwidth 0
  gpon channel fixed-bandwidth 0
  min-rate 0
  no shutdown
!

========================================
========================================

... later when I get vlans (802.1q) working, and a possible out-of-band-management SubH working, I will again add that configuration information here. North Idaho Tom Jones