Difference between revisions of "Managing Power Distribution Unit via SMS"
From MikroTik Wiki
| Line 40: | Line 40: | ||
:local ADMIN | :local ADMIN | ||
:local PASSWORD | :local PASSWORD | ||
| − | :local ONOFF [:toarray ("OFF | + | :local ONOFF [:toarray ("OFF,ON ")] |
:local HEXAS [:toarray ("0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f")] | :local HEXAS [:toarray ("0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f")] | ||
Revision as of 10:31, 12 February 2015
Below a script to manage Aviosys 9258S, 9258DS, ... PDU via /tool sms
Original page (in French) [1]
# Script RouterOS SMSIpPower de gestion des prises d'Aviosys 9258S et 9258DS #
# Envoi un SMS de l'etat releve, bascule l'etat d'une prise. #
# Marc Dilasser, Le Net du Kermeur, Fevrier 2015 #
#####################################################################################
:global DV
:global PR
:global OP
:local ADRIP ""
:local NETWORK "LNDK"
:local DEVNAME ""
:local MODEL ""
:local PRISE -1
:local NBJOB
:local NBSMS
:local VER
:local NBOPER
:local URL
:local ERR
:local OUTFILE "EtatIpPower"
:local IDF
:local CONTENT
:local MSG
:local HHMMSS
:local IJ
:local IK
:local ISTAT
:local IOSTATE
:local ITEM
:local PORT
:local NUMTEL
:local DEBUG 0
:local ADMIN
:local PASSWORD
:local ONOFF [:toarray ("OFF,ON ")]
:local HEXAS [:toarray ("0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f")]
#######################################################################################
# Valeurs a configurer suivant exploitation : #
# - user et mot de passe Aviosys #
# - adresse ip #
# - nom de device #
# - modele #
# - numero telephone destinataire du SMS, par defaut allowed-number de /tool sms #
# - le device par defaut #
# La variable DV du SMS, si presente, donne le device #
# La variable PR du SMS, si presente, donne la prise a basculer #
# La variable OP du SMS, si presente, donne le type d'operation (non implementee) #
#######################################################################################
:if ([:len $DV] = 0) do={:set DV "pwr001"; }
:set ADMIN "admin"
:set PASSWORD "password"
:if ($DV = "pwr001") do={
:set ADRIP "10.6.7.8";
:set DEVNAME "pwr001";
:set MODEL "9258S";
}
:if ($DV = "pwr009") do={
:set ADRIP "10.6.2.9";
:set DEVNAME "pwr009";
:set MODEL "9258DSv1";
:set PASSWORD "motdepasse"
}
:if ($DV = "pwr028") do={
:set ADRIP "192.168.1.100";
:set DEVNAME "pwr028";
:set MODEL "9258DSv4";
:set PASSWORD "motdepasse";
:set DEBUG 1;
}
:if ($DV = "pwr029") do={
:set ADRIP "192.168.1.100";
:set DEVNAME "pwr029";
:set MODEL "9258HP";
:set PASSWORD "motdepasse"
:set DEBUG 1
}
#######################################################################################
# END OF CONFIG #
#######################################################################################
#################################################################################################
# CGI commands examples on different Aviosys models and responses #
# 9258S : #
# > /tool fetch url="http://admin:password@192.168.1.100/Set.cmd\?CMD=GetPower" #
# < <html>p61=0,p62=1,p63=0,p64=0</html> #
# 9258DSv1 : (firmware version 1.x) #
# > wget -qO- http://192.168.1.100/Set.cmd?user=admin+pass=password+CMD=SetSysIO+IO=fb+Delay=1 #
# < IOVALUE:fb #
# 9258DSv4 : (firmware version 4.x) #
# > wget -qO- http://192.168.8.100/set.cmd?user=admin+pass=password+cmd=setpower+p63=1 #
# < P61=0,P62=1,P63=1,P64=0,P65=1,P66=1,P67=1,P68=1 #
# 9258HP : #
# > wget -qO- http://admin:password@192.168.1.100/SetPower.cgi?p4=1 #
# < <TITLE>Set Power Control</TITLE><BODY>Power Control = P4:1,P3:0,P2:1,P1:1;<p><b>[0->OFF... #
#################################################################################################
:set NBJOB [/system script job print count-only where script=SMSIpPower]
if ($NBJOB > 1) do={
:log error "Lancement en double"
return 240
}
:if ([:len $PR] > 0) do={
:set NBOPER 3
:set PRISE ($PR - 1);
} else={
:set NBOPER 1
}
:if ([:len $OP] = 0) do={ :set OP ""; }
:set VER [/system resource get version]
:log info "Device $DEVNAME, adresse $ADRIP"
#######################################################################################
# Bouclage tant qu'il reste des operations a effectuer #
#######################################################################################
while ($NBOPER > 0) do={
:set URL ""
:if ($MODEL = "9258S") do={
:set URL ("http://" . $ADMIN . ":" . $PASSWORD . "@" . $ADRIP . "/Set.cmd\?CMD=GetPower")
}
:if ($MODEL = "9258DSv1") do={
:set URL ("http://" . $ADRIP . "/Set.cmd\?user=" . $ADMIN . "+pass=" . $PASSWORD . "+CMD=GetSysIO")
}
:if ($MODEL = "9258DSv4") do={
:set URL ("http://" . $ADRIP . "/set.cmd\?user=" . $ADMIN . "+pass=" . $PASSWORD . "+cmd=GetPower")
}
:if ($MODEL = "9258HP") do={
:set URL ("http://" . $ADRIP . "/GetPower.cgi")
}
# Pas d'URL definie, on sort
:if ([:len $URL] = 0) do={
:return 250
} else={
:if ($DEBUG > 0) do={ :put "Url : $URL"; }
}
# Passer la commande HTTP d'interrogation de l'etat de l'IpPower
# et recuperation du resultat, si RouterOS >= 6.2 l'erreur Http peut etre testee
:set ERR 0
:if ($VER >= 6.20) do={
:do {
/tool fetch url=$URL dst-path=$OUTFILE;
} on-error={ :set ERR 1};
} else={
/tool fetch url=$URL dst-path=$OUTFILE;
}
:if ($ERR < 1) do={
:set IDF [/file find where name=$OUTFILE]
:set CONTENT [ /file get $IDF contents]
:if ($DEBUG > 0) do={ :put $CONTENT; }
# Message SMS
:set HHMMSS [/system clock get time]
:set MSG ($NETWORK . " : etat de " . $DEVNAME . " a " . $HHMMSS . "\n")
# Pour 9258DS, recuperation de deux octets en hexa
:if ($MODEL = "9258DSv1") do={
:set ISTAT [:tonum ("0x" . [:pick $CONTENT 9 11])]
:set IOSTATE $ISTAT
:set IJ 0
while ($IJ < 8) do={
:set IK ($ISTAT % 2)
:set MSG ($MSG . "Prise " . [:tostr ($IJ + 1)] . " : " . [:pick $ONOFF $IK] . " ")
:if (($IJ % 2) = 1) do={ :set MSG ($MSG . "\n"); }
:set ISTAT ($ISTAT / 2)
:set IJ ($IJ + 1)
}
}
# 9258S et 9258DSv4, on recupere un ligne du genre <html>p61=0,p62=0,p63=0,p64=0</html>
# Si un numero de prise, noter son etat
:if (($MODEL = "9258S") || ($MODEL = "9258DSv4")) do={
:if ($MODEL = "9258S") do={ :set IJ 10; } else={ :set IJ 5; }
:if (([:pick $CONTENT 0 6] = "<html>") || ([:pick $CONTENT 0 5] = " P61=")) do={
:set MSG ($MSG . " Prise 1 : " . ([:pick $ONOFF [:pick $CONTENT $IJ ]]))
:set MSG ($MSG . ", prise 2 : " . ([:pick $ONOFF [:pick $CONTENT ($IJ + 6) ]]) . "\n")
:set MSG ($MSG . " Prise 3 : " . ([:pick $ONOFF [:pick $CONTENT ($IJ + 12) ]]))
:set MSG ($MSG . ", prise 4 : " . ([:pick $ONOFF [:pick $CONTENT ($IJ + 18) ]]))
:if ($MODEL = "9258DSv4") do={
:set MSG ($MSG . "\n")
:set MSG ($MSG . " Prise 5 : " . ([:pick $ONOFF [:pick $CONTENT ($IJ + 24) ]]))
:set MSG ($MSG . ", prise 6 : " . ([:pick $ONOFF [:pick $CONTENT ($IJ + 30) ]]) . "\n")
:set MSG ($MSG . " Prise 7 : " . ([:pick $ONOFF [:pick $CONTENT ($IJ + 36) ]]))
:set MSG ($MSG . ", prise 8 : " . ([:pick $ONOFF [:pick $CONTENT ($IJ + 42) ]]))
}
:if ( $PRISE > -1 ) do={
:set IOSTATE [:pick $CONTENT ($IJ + (6 * $PRISE))]
:log info ("Prise " . ($PRISE + 1) . ", iostate : $IOSTATE")
}
}
}
# 9258HP
:if ($MODEL = "9258HP") do={
:set IJ [:find $CONTENT "Control = P4"]
:if ([:len $IJ] > 0) do={
:set IJ ($IJ + 13)
:set MSG ($MSG . " Prise 1 : " . ([:pick $ONOFF [:pick $CONTENT ($IJ + 15) ]]))
:set MSG ($MSG . ", prise 2 : " . ([:pick $ONOFF [:pick $CONTENT ($IJ + 10) ]]) . "\n")
:set MSG ($MSG . " Prise 3 : " . ([:pick $ONOFF [:pick $CONTENT ($IJ + 5) ]]))
:set MSG ($MSG . ", prise 4 : " . ([:pick $ONOFF [:pick $CONTENT $IJ ]]))
:if ( $PRISE > -1 ) do={
:set IOSTATE [:pick $CONTENT ($IJ + (5 * $PRISE))]
:log info ("Prise " . ($PRISE + 1) . ", iostate : $IOSTATE")
}
}
}
###################################################### Envoi du SMS
if ([:len $MSG] > 60) do={
:if ($DEBUG = 0) do={
:set PORT [/tool sms get port]
:if ([:len $NUMTEL] = 0) do={
:set NUMTEL [/tool sms get allowed-number]
}
/tool sms send $PORT $NUMTEL message=$MSG
} else={
:put ($MSG)
:log info ($MSG)
}
}
/file remove $IDF
} else={
# Erreur HTTP, on sort
return 220;
}
:set NBOPER ($NBOPER - 1)
# Tester s'il reste une operation de bascule de prise
:if (($NBOPER > 1) && ([:len $PR] = 1)) do={
:set URL ""
:if ($MODEL = "9258S") do={
:set URL ("http://" . $ADMIN . ":" . $PASSWORD . "@" . $ADRIP . "/Set.cmd\?CMD=SetPower")
:set URL ($URL . "+P6" . [:tostr ($PRISE + 1)] . "=" . [:tostr (($IOSTATE + 1) % 2)])
}
:if ($MODEL = "9258DSv4") do={
:set URL ("http://" . $ADMIN . ":" . $PASSWORD . "@" . $ADRIP . "/set.cmd\?cmd=setpower")
:set URL ($URL . "+p6" . [:tostr ($PRISE + 1)] . "=" . [:tostr (($IOSTATE + 1) % 2)])
}
:if ($MODEL = "9258DSv1") do={
:set URL ("http://" . $ADRIP . "/Set.cmd\?user=" . $ADMIN . "+pass=" . $PASSWORD . "+CMD=SetSysIO+IO=")
# Construire un MASK pour un XOR
:set IJ 8
:set IK 0
while ($IJ > 0) do={
:set IK ($IK * 2)
:if ($IJ = ($PRISE + 1)) do={ :set IK ($IK + 1); }
:set IJ ($IJ - 1)
}
:set IJ ( $IOSTATE ^ $IK)
:set URL ($URL . [:pick $HEXAS ($IJ / 16)])
:set URL ($URL . [:pick $HEXAS ($IJ % 16)])
:set URL ($URL . "+Delay=1")
}
:if ($MODEL = "9258HP") do={
:set URL ("http://" . $ADMIN . ":" . $PASSWORD . "@" . $ADRIP . "/SetPower.cgi\?p")
:set URL ($URL . [:tostr ($PRISE + 1)] . "=" . [:tostr (($IOSTATE + 1) % 2)])
}
# Pas d'URL definie, on sort
:if ([:len $URL] = 0) do={
:return 230
}
:if ($DEBUG > 1) do={
:put "Url : $URL"
:log info "Url : $URL"
} else={
:log info "Url : $URL"
:set ERR 0
:if ($VER >= 6.20) do={
:do {
/tool fetch url=$URL dst-path=$OUTFILE;
} on-error={ :set ERR 1};
} else={
/tool fetch url=$URL dst-path=$OUTFILE;
}
:if ($ERR < 1) do={
:set IDF [/file find where name=$OUTFILE]
/file remove $IDF
}
}
:set NBOPER ($NBOPER - 1)
} else={
:set NBOPER 0
}
}
# Nettoyage
:foreach ITEM in ("DV", "OP", "PR") do={
/system script environment remove [find where name=$ITEM]
}
# Nettoyer l'Inbox des SMS
:set NBSMS [/tool sms inbox print count-only]
:if ($NBSMS >= 30) do={
/tool sms inbox remove 0,1,2,3,4,5,6,7,8,9
}
########### End of SMSIpPower ########### That's All, Folks ###########
