Managing Power Distribution Unit via SMS
From MikroTik Wiki
Revision as of 12:49, 17 February 2015 by Marc Dilasser (talk | contribs)
Below a script to manage Aviosys 9258S, 9258HP, 9258DS, ... PDU via /tool sms
Original page (in French): Gestion des alimentations électriques via SMS
Getting state of outlets of default device and device name pwr004 :
/system script run LndkSmsPower :global DV "pwr004"; /system script run LndkSmsPower
Switching outlet 2 of default devvice :
:global PR 2; /system script run LndkSmsPower
SMS to send to switch outlet 3 of device name pwr004 :
:cmd password LndkSmsPower DV=pwr004 PR=3
The LndkSmsPower script :
#######################################################################################
# Script RouterOS LndkSmsPower #
# Managing outlets of Aviosys PDU 9258S, 9258HP and 9258DS via SMS #
# Send state of outlets of the device, switch or reinit outlet #
# Web page : http://blog.lekermeur.net/?p=2531 #
# Marc Dilasser, Le Net du Kermeur, Fevrier 2015 #
#######################################################################################
:global DV
:global PR
:global OP
:local ADRIP ""
:local HPORT
:local NETWORK "MyNet"
:local DEVNAME ""
:local MODEL ""
:local PRISE -1
:local NBJOB
:local NBSMS
:local VER
:local NBOPER
:local URL
:local ERR
:local OUTFILE "LndkPowerState"
:local IDF
:local CONTENT
:local MSG
:local HHMMSS
:local IJ
:local IK
:local IL
:local ISTAT
:local IOSTATE
:local ITEM
:local PORT
:local NUMTEL
:local DEBUG 0
:local ADMIN
:local PASSWORD
:local OPER
:local AROPERS
:local ONOFF [:toarray ("OFF,ON ")]
:local HEXA [:toarray ("0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f")]
:local ARLANGS [:toarray ("en,fr")]
:local AAR {
"address"={ en="address"; fr="adresse" };
"outlet"={ en="outlet"; fr="prise" };
"device"={ en="device"; fr="equipement"};
"model"={ en="model"; fr="modele" };
"state"={ en=" state of "; fr=" etat de " };
"at"={ en=" at "; fr=" a " };
"err220"={ en="http error"; fr="erreur acces http" };
"err230"={ en="Url non defined"; fr="Url non definie" };
"err240"={ en="script already running"; fr="script deja en cours" };
}
#######################################################################################
# Valeurs a configurer suivant exploitation : #
# - user et mot de passe Aviosys #
# - adresse ip #
# - nom de device #
# - modele #
# - numero telephone destinataire du SMS, par defaut allowed-number de /tool sms #
# - le device par defaut #
# La variable DV du SMS, si presente, donne le device #
# La variable PR du SMS, si presente, donne la prise a basculer #
# La variable OP du SMS, si presente, donne le type d'operation (non implementee) #
#######################################################################################
:set ADMIN "admin"
:set PASSWORD "password"
# Default lang is en
# :set LANG "fr"
:if ($DV = "pwr001") do={
:set ADRIP "10.6.7.8"
:set DEVNAME "pwr001"
:set MODEL "9258S"
}
:if ($DV = "pwr009") do={
:set ADRIP "10.6.2.9"
:set DEVNAME "pwr009"
:set MODEL "9258DSv1"
:set PASSWORD "motdepasse"
}
:if ($DV = "pwr028") do={
:set ADRIP "192.168.1.100"
:set DEVNAME "pwr028"
:set MODEL "9258DSv4"
:set PASSWORD "motdepasse"
:set DEBUG 1
}
:if ($DV = "pwr029") do={
:set ADRIP "192.168.1.100"
:set HPORT "8084"
:set DEVNAME "pwr029"
:set MODEL "9258HP"
:set PASSWORD "motdepasse"
:set DEBUG 1
}
#######################################################################################
# END OF CONFIG #
#######################################################################################
#################################################################################################
# CGI commands examples on different Aviosys models and responses #
# 9258S : #
# > /tool fetch url="http://admin:password@192.168.1.100/Set.cmd\?CMD=GetPower" #
# < <html>p61=0,p62=1,p63=0,p64=0</html> #
# 9258DSv1 : (firmware version 1.x) #
# > wget -qO- http://192.168.1.100/Set.cmd?user=admin+pass=password+CMD=SetSysIO+IO=fb+Delay=1 #
# < IOVALUE:fb #
# 9258DSv4 : (firmware version 4.x) #
# > wget -qO- http://192.168.8.100/set.cmd?user=admin+pass=password+cmd=setpower+p63=1 #
# < P61=0,P62=1,P63=1,P64=0,P65=1,P66=1,P67=1,P68=1 #
# 9258HP : #
# > wget -qO- http://admin:password@192.168.1.100/SetPower.cgi?p4=1 #
# < <TITLE>Set Power Control</TITLE><BODY>Power Control = P4:1,P3:0,P2:1,P1:1;<p><b>[0->OFF... #
#################################################################################################
:set NBJOB [/system script job print count-only where script=SMSIpPower]
if ($NBJOB > 1) do={
:log error ($AAR->"err240"->$LANG)
return 240
}
#######################################################################################
# List of operations #
# Default operation is ST, only send STATE #
# If PR (outlet) is set, defaut OP is SW, to switch this outlet #
# If OP is RE (reinit) and PR is set, operations are STATE,SWITCH,DELAY,SWITCH,STATE #
# If OP is LI (list names of outlets), operation is LIST (not implemented yet) #
#######################################################################################
:if (([:len [:find $ARLANGS $LANG]]) = 0) do={ :set LANG "en"; }
:if ([:len $OP] = 0) do={
:set OP "ST";
:if ([:len $PR] = 1) do={ :set OP "SW"; }
}
:set AROPERS [:toarray ("STATE")]
:if ($OP = "SW") do={
:if ([:len $PR] = 1) do={
:set AROPERS [:toarray ("STATE,SWITCH,STATE")]
}
}
:if ($OP = "RE") do={
:if ([:len $PR] = 1) do={
:set AROPERS [:toarray ("STATE,SWITCH,DELAY20,SWITCH,STATE")]
}
}
:if ($OP = "LI") do={
:set AROPERS [:toarray ("LIST")]
}
:if ([:len $PR] > 0) do={
:set PRISE ([:tonum $PR] - 1);
}
:if ([:len $OP] = 0) do={ :set OP ""; }
:set VER [/system resource get version]
:set MSG (($AAR->"device"->$LANG) . " " . $DEVNAME . ", ")
:set MSG ($MSG . ($AAR->"model"->$LANG) . " " . $MODEL . ", ")
:set MSG ($MSG . ($AAR->"address"->$LANG) . " " . $ADRIP)
:log info $MSG
#######################################################################################
# Do while some operation to do #
#######################################################################################
foreach OPER in ($AROPERS) do={
:if ($OPER = "STATE") do={
:set URL ""
:if ($MODEL = "9258S") do={
:set URL ("http://" . $ADMIN . ":" . $PASSWORD . "@" . $ADRIP )
:if ([:len $HPORT] > 0) do={ :set URL ($URL . ":" . $HPORT); }
:set URL ($URL . "/Set.cmd\?CMD=GetPower")
}
:if ($MODEL = "9258DSv1") do={
:set URL ("http://" . $ADRIP);
:if ([:len $HPORT] > 0) do={ :set URL ($URL . ":" . $HPORT); }
:set URL ($URL . "/Set.cmd\?user=" . $ADMIN )
:set URL ($URL . "+pass=" . $PASSWORD . "+CMD=GetSysIO")
}
:if ($MODEL = "9258DSv4") do={
:set URL ("http://" . $ADRIP)
:if ([:len $HPORT] > 0) do={ :set URL ($URL . ":" . $HPORT); }
:set URL ($URL . "/set.cmd\?user=" . $ADMIN )
:set URL ($URL . "+pass=" . $PASSWORD . "+cmd=GetPower")
}
:if ($MODEL = "9258HP") do={
:set URL ("http://" . $ADRIP)
:if ([:len $HPORT] > 0) do={ :set URL ($URL . ":" . $HPORT); }
:set URL ($URL . "/GetPower.cgi")
}
:if ([:len $URL] = 0) do={
:return 250
} else={
:if ($DEBUG > 0) do={ :put "Url : $URL"; }
}
:set ERR 0
:if ($VER >= 6.20) do={
:do {
/tool fetch url=$URL dst-path=$OUTFILE;
} on-error={ :set ERR 1};
} else={
/tool fetch url=$URL dst-path=$OUTFILE;
}
:if ($ERR < 1) do={
:set IDF [/file find where name=$OUTFILE]
:set CONTENT [ /file get $IDF contents]
:if ($DEBUG > 0) do={ :put $CONTENT; }
:set HHMMSS [/system clock get time]
:set MSG ($NETWORK . " :" . ($AAR->"state"->$LANG))
:set MSG ($MSG . $DEVNAME . ($AAR->"at"->$LANG) . $HHMMSS . "\n")
:if ($MODEL = "9258DSv1") do={
:set ISTAT [:tonum ("0x" . [:pick $CONTENT 9 11])]
:set IOSTATE $ISTAT
:set IJ 0
while ($IJ < 8) do={
:set IK ($ISTAT % 2)
:set MSG ($MSG . ($AAR->"outlet"->$LANG) . " " . [:tostr ($IJ + 1)] )
:set MSG ($MSG . " : " . [:pick $ONOFF $IK] . " ")
:if (($IJ % 2) = 1) do={ :set MSG ($MSG . "\n"); }
:set ISTAT ($ISTAT / 2)
:set IJ ($IJ + 1)
}
}
:if (($MODEL = "9258S") || ($MODEL = "9258DSv4")) do={
:if ($MODEL = "9258S") do={
:set IJ 10;
:set IK 4;
} else={
:set IJ 5;
:set IK 8;
}
:if (([:pick $CONTENT 0 6] = "<html>") || ([:pick $CONTENT 0 5] = " P61=")) do={
:for IL from=1 to=$IK do={
:set MSG ($MSG . " " . ($AAR->"outlet"->$LANG) . " " . ([:tostr $IL]) . " : ")
:set MSG ($MSG . ([:pick $ONOFF [:pick $CONTENT ($IJ + (($IL - 1) * 6)) ]]))
:if ((($IL % 2) = 0) && ($IL < $IK)) do={
:set MSG ($MSG . "\n")
}
}
:if ( $PRISE > -1 ) do={
:set IOSTATE [:pick $CONTENT ($IJ + (6 * $PRISE))]
:log info (($AAR->"outlet"->$LANG) . " " . ($PRISE + 1) . ", iostate : $IOSTATE")
}
}
}
:if ($MODEL = "9258HP") do={
:set IJ [:find $CONTENT "Control = P4"]
:if ([:len $IJ] > 0) do={
:set IJ ($IJ + 13)
:set MSG ($MSG . " " . ($AAR->"outlet"->$LANG) . " 1 : ")
:set MSG ($MSG . ([:pick $ONOFF [:pick $CONTENT ($IJ + 15) ]]))
:set MSG ($MSG . ", " . ($AAR->"outlet"->$LANG) . " 2 : ")
:set MSG ($MSG . ([:pick $ONOFF [:pick $CONTENT ($IJ + 10) ]]) . "\n")
:set MSG ($MSG . " " . ($AAR->"outlet"->$LANG) . " 3 : ")
:set MSG ($MSG . ([:pick $ONOFF [:pick $CONTENT ($IJ + 5) ]]))
:set MSG ($MSG . ", " . ($AAR->"outlet"->$LANG) . " 4 : ")
:set MSG ($MSG . ([:pick $ONOFF [:pick $CONTENT $IJ ]]))
:if ( $PRISE > -1 ) do={
:set IOSTATE [:pick $CONTENT ($IJ + (5 * $PRISE))]
:log info (($AAR->"outlet"->$LANG) . " " . ($PRISE + 1) . ", iostate : $IOSTATE")
}
}
}
:if ([:len $MSG] > 60) do={
:if ($DEBUG = 0) do={
:set PORT [/tool sms get port]
:if ([:len $NUMTEL] = 0) do={
:set NUMTEL [/tool sms get allowed-number]
}
/tool sms send $PORT $NUMTEL message=$MSG
} else={
:put ($MSG)
:log info ($MSG)
}
}
/file remove $IDF
} else={
:log error ($AAR->"err220"->$LANG)
return 220;
}
}
:if ($OPER = "SWITCH") do={
:if (([:len $PRISE] = 1) && ([:len $IOSTATE] > 0)) do={
:set URL ""
:if ($MODEL = "9258S") do={
:set URL ("http://" . $ADMIN . ":" . $PASSWORD . "@")
:set URL ($URL . $ADRIP)
:if ([:len $HPORT] > 0) do={ :set URL ($URL . ":" . $HPORT); }
:set URL ($URL . "/Set.cmd\?CMD=SetPower")
:set URL ($URL . "+P6" . [:tostr ($PRISE + 1)] . "=")
:set URL ($URL . [:tostr (($IOSTATE + 1) % 2)])
}
:if ($MODEL = "9258DSv4") do={
:set URL ("http://" . $ADMIN . ":" . $PASSWORD . "@")
:set URL ($URL . $ADRIP)
:if ([:len $HPORT] > 0) do={ :set URL ($URL . ":" . $HPORT); }
:set URL ($URL . "/set.cmd\?cmd=setpower")
:set URL ($URL . "+p6" . [:tostr ($PRISE + 1)] . "=")
:set URL ($URL . [:tostr (($IOSTATE + 1) % 2)])
}
:if ($MODEL = "9258DSv1") do={
:set URL ("http://" . $ADRIP)
:if ([:len $HPORT] > 0) do={ :set URL ($URL . ":" . $HPORT); }
:set URL ($URL . "/Set.cmd\?user=" . $ADMIN )
:set URL ($URL . "+pass=" . $PASSWORD . "+CMD=SetSysIO+IO=")
:set IJ 8
:set IK 0
while ($IJ > 0) do={
:set IK ($IK * 2)
:if ($IJ = ($PRISE + 1)) do={ :set IK ($IK + 1); }
:set IJ ($IJ - 1)
}
:set IJ ( $IOSTATE ^ $IK)
:set URL ($URL . [:pick $HEXA ($IJ / 16)])
:set URL ($URL . [:pick $HEXA ($IJ % 16)])
:set URL ($URL . "+Delay=1")
}
:if ($MODEL = "9258HP") do={
:set URL ("http://" . $ADMIN . ":" . $PASSWORD . "@")
:set URL ($URL . $ADRIP)
:if ([:len $HPORT] > 0) do={ :set URL ($URL . ":" . $HPORT); }
:set URL ($URL . "/SetPower.cgi\?p")
:set URL ($URL . [:tostr ($PRISE + 1)] . "=")
:set URL ($URL . [:tostr (($IOSTATE + 1) % 2)])
}
:if ([:len $URL] = 0) do={
:log error ($AAR->"err230"->$LANG)
:return 230
}
:if ($DEBUG > 0) do={
:put "Url : $URL"
:log info "Url : $URL"
} else={
:log info "Url : $URL"
:set ERR 0
:if ($VER >= 6.20) do={
:do {
/tool fetch url=$URL dst-path=$OUTFILE;
} on-error={ :set ERR 1};
} else={
/tool fetch url=$URL dst-path=$OUTFILE;
}
:if ($ERR < 1) do={
:set IDF [/file find where name=$OUTFILE]
/file remove $IDF
}
}
} else={
:log error ($AAR->"err220"->$LANG)
:return 220
}
}
:if ($OPER = "DELAY20") do={
:delay 20
}
:if ($OPER = "LIST") do={
:delay 1
}
}
#######################################################################################
# Some cleanings #
#######################################################################################
:foreach ITEM in ("DV", "OP", "PR") do={
/system script environment remove [find where name=$ITEM]
}
:set NBSMS [/tool sms inbox print count-only]
:if ($NBSMS >= 30) do={
/tool sms inbox remove 0,1,2,3,4,5,6,7,8,9
}
########### End of LndkSmsPower ########### That's All, Folks ###########
