Difference between revisions of "Manual:CHR VMWare installation"

From MikroTik Wiki
Jump to: navigation, search
(How to Install Cloud Hosted Router on VMWare Fusion)
Line 17: Line 17:
 
* Step 8:
 
* Step 8:
 
[[File:CHR_VMWare_8.png | 600px | VMWare ]]
 
[[File:CHR_VMWare_8.png | 600px | VMWare ]]
* Step 9: By default CHR disk image is 64MB. If bigger storage is desired, you can expand the virtual hard drive. Choose Customize Settings to do so. NOTE. IT MUST BE DONE BEFORE 1st RUN.
+
* Step 9: By default CHR disk image is 64MB. If bigger storage is desired, you can expand the virtual hard drive. Choose Customize Settings to do so. NOTE. IT MUST BE DONE BEFORE the 1st RUN.
 
[[File:CHR_VMWare_11.png | 600px | VMWare ]]
 
[[File:CHR_VMWare_11.png | 600px | VMWare ]]
 
* Step 10: Choose Hard Disk and set the new disk size  
 
* Step 10: Choose Hard Disk and set the new disk size  

Revision as of 10:17, 14 December 2015

How to Install Cloud Hosted Router on VMWare Fusion

Create a new virtual machine

  • Step 1:

VMWare

  • Step 2:

VMWare

  • Step 3: Choose existing virtual disk

VMWare

VMWare

  • Step 5:

VMWare

  • Step 6: By default VMWare uses 256MB RAM, adjust the size if needed, any size starting from 32MB can be used for RouterOS

VMWare

  • Step 7: Adjust the size of the RAM

VMWare

  • Step 8:

VMWare

  • Step 9: By default CHR disk image is 64MB. If bigger storage is desired, you can expand the virtual hard drive. Choose Customize Settings to do so. NOTE. IT MUST BE DONE BEFORE the 1st RUN.

VMWare

  • Step 10: Choose Hard Disk and set the new disk size

VMWare

  • Step 11:

VMWare