Manual:CRS1xx/2xx series switches examples

From MikroTik Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Version.png

Applies to RouterOS: v6.6 +


Summary

Basic switch-chip configuration examples for Cloud Router Switch.

Icon-note.png

Note: More examples are about to be added.



Port Based VLAN

Alt text
Port Based VLAN
  • Create a group of switched ports and configure switch for IEEE 802.1Q bridging.
/interface ethernet
set ether6 master-port=ether2
set ether7 master-port=ether2
set ether8 master-port=ether2
/interface ethernet switch
set bridge-type=customer-vlan-bridge
  • Tag ingress traffic coming from each of the access ports by assigning new VLAN ids for untagged (VLAN id 0) frames.
/interface ethernet switch ingress-vlan-translation
add port=ether6 customer-vid=0 new-customer-vid=200 sa-learning=yes
add port=ether7 customer-vid=0 new-customer-vid=300 sa-learning=yes
add port=ether8 customer-vid=0 new-customer-vid=400 sa-learning=yes
  • Untag egress traffic on access ports by replacing current VLAN ids with VLAN id 0.
/interface ethernet switch egress-vlan-translation
add port=ether6 customer-vid=200 new-customer-vid=0 sa-learning=yes
add port=ether7 customer-vid=300 new-customer-vid=0 sa-learning=yes
add port=ether8 customer-vid=400 new-customer-vid=0 sa-learning=yes

Protocol Based VLAN

Alt text
Protocol Based VLAN
  • Create a group of switched ports.
/interface ethernet
set ether6 master-port=ether2
set ether7 master-port=ether2
set ether8 master-port=ether2
  • Set VLAN for IP and ARP protocols
/interface ethernet switch protocol-based-vlan
add port=ether2 protocol=arp set-customer-vid-for=all new-customer-vid=0
add port=ether6 protocol=arp set-customer-vid-for=all new-customer-vid=200
add port=ether2 protocol=ip set-customer-vid-for=all new-customer-vid=0
add port=ether6 protocol=ip set-customer-vid-for=all new-customer-vid=200
  • Set VLAN for IPX protocol
/interface ethernet switch protocol-based-vlan
add port=ether2 protocol=ipx set-customer-vid-for=all new-customer-vid=0
add port=ether7 protocol=ipx set-customer-vid-for=all new-customer-vid=300
  • Set VLAN for AppleTalk AARP and AppleTalk DDP protocols
/interface ethernet switch protocol-based-vlan
add port=ether2 protocol=0x80F3 set-customer-vid-for=all new-customer-vid=0
add port=ether8 protocol=0x80F3 set-customer-vid-for=all new-customer-vid=400
add port=ether2 protocol=0x809B set-customer-vid-for=all new-customer-vid=0
add port=ether8 protocol=0x809B set-customer-vid-for=all new-customer-vid=400

MAC Based VLAN

Alt text
MAC Based VLAN
  • Create a group of switched ports.
/interface ethernet
set ether7 master-port=ether2
  • Enable MAC based VLAN translation on access port.
/interface ethernet switch port
set ether7 mac-based-vlan-translate=yes mac-based-customer-vlan=all-frames
  • Add MAC-to-VLAN mapping entries in MAC based VLAN table.
/interface ethernet switch mac-based-vlan
add src-mac=A4:12:6D:77:94:43 new-customer-vid=200
add src-mac=84:37:62:DF:04:20 new-customer-vid=300
add src-mac=E7:16:34:A1:CD:18 new-customer-vid=400
  • Set VLAN id untagging for tagged frames coming from the trunk port.
/interface ethernet switch ingress-vlan-translation
add port=ether2 customer-vlan-lookup-for=tagged new-customer-vid=0 sa-learning=yes

Management IP Configuration

  • Add VLAN 99 interface and assign IP address to it. Since the master-port receives all the traffic coming from switch-cpu port, VLAN has to be configured on master-port, in this case "ether2" port.
/interface vlan
add name=vlan99 vlan-id=99 interface=ether2
/ip address
add address=192.168.88.1/24 interface=vlan99 network=192.168.88.0

[ Top | Back to Content ]