Manual:Entering a RouterOS License key: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
No edit summary
 
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
== First method ==
== First method ==


After you install the Mikrotik RouterOS software, you will have no key, but for 24 hours the router will be operable and working. During this period configure the router to have an IP address, for example '''10.1.0.133''', then purchase a key on the www.mikrotik.com account server. To enter this key, '''Telnet''' to the router:  
If you have installed the Router OS onto a PC (i.e. it is not a RouterBoard), you will initially have no key, but for 24 hours the router will be fully operable and working. During this period [[First_time_startup|configure the router]] to have an IP address, for example '''10.1.0.133''', then purchase a key on the www.mikrotik.com [[Account_Server|account server]]. To enter this key follow this short guide:
 
*'''Telnet''' to the router:  


[[Image:Key0.png]]
[[Image:Key0.png]]
*find the email from mikrotik which contains your key


[[Image:Key1.png]]
[[Image:Key1.png]]
*select this key and click '''copy'''


[[Image:Key2.png]]
[[Image:Key2.png]]
*in the telnet window right-click the screen and choose '''paste'''


[[Image:Key3.png]]
[[Image:Key3.png]]
*type '''y''' and hit enter to reboot the router


[[Image:Key4.png]]
[[Image:Key4.png]]
*For fans of the serial console, you may enter the license information via the serial console on certain equipment.  Perform the same operation as in the telnet session above, i.e., at the console prompt, paste the license information as if it were a command;  the paste buffer or clipboard should contain the full text including the lines containing "BEGIN" and "END" as mentioned above.
[[Category:Manual|L]]
[[Category:License|L]]
[[Category:Basic|L]]

Latest revision as of 08:56, 14 April 2010

First method

If you have installed the Router OS onto a PC (i.e. it is not a RouterBoard), you will initially have no key, but for 24 hours the router will be fully operable and working. During this period configure the router to have an IP address, for example 10.1.0.133, then purchase a key on the www.mikrotik.com account server. To enter this key follow this short guide:

  • Telnet to the router:

Key0.png

  • find the email from mikrotik which contains your key

Key1.png

  • select this key and click copy

Key2.png

  • in the telnet window right-click the screen and choose paste

Key3.png

  • type y and hit enter to reboot the router

Key4.png

  • For fans of the serial console, you may enter the license information via the serial console on certain equipment. Perform the same operation as in the telnet session above, i.e., at the console prompt, paste the license information as if it were a command; the paste buffer or clipboard should contain the full text including the lines containing "BEGIN" and "END" as mentioned above.