Manual:EoMPLS vs Cisco: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
(Created page with "__TOC__ ==Summary== This article describes the basic setup of Point-to-Point EoMPLS with Cisco routers. In this example IOS 15.1 was used, configuration in older versions may d...")
 
Line 3: Line 3:
==Summary==
==Summary==


This article describes the basic setup of Point-to-Point EoMPLS with Cisco routers. In this example IOS 15.1 was used, configuration in older versions may differ.  
This article describes the basic setup of Point-to-Point EoMPLS with Cisco routers. In this example IOS 15.1 was used, configuration in older versions may differ.




==Configuration==


Consider network setup as ilustrated below:


[[File:EoMPLS-cisco.png]]
We will be setting up the layer 2 connection between the CE and PE routers as well as the MPLS and EoMPLS between PE routers. The layer 2 link between the CE and PE routers will be an Ethernet circuit.


==See Also==
==See Also==

Revision as of 10:42, 25 May 2012

Summary

This article describes the basic setup of Point-to-Point EoMPLS with Cisco routers. In this example IOS 15.1 was used, configuration in older versions may differ.


Configuration

Consider network setup as ilustrated below:

EoMPLS-cisco.png

We will be setting up the layer 2 connection between the CE and PE routers as well as the MPLS and EoMPLS between PE routers. The layer 2 link between the CE and PE routers will be an Ethernet circuit.

See Also