Manual:Failover with firewall marking
This example demonstrates how to set up failover with a Firewall mangle, filter and NAT rules.
In this example our provider assigned two upstream links, one connected to ether1 and other to ether2. Our local network has two subnets 192.168.1.0/24 and 192.168.2.0/24
/ip address add address=10.1.101.18/24 interface=ether1 add address=10.1.200.18/24 interface=ether2 add address=192.168.1.1/24 interface=Local add address=192.168.2.1/24 interface=Local
Mangle and NAT
Connections going through the ehter1 interface is marked as "first" and packets going through the ether2 is marked as "other".
/ip firewall mangle add action=mark-connection chain=forward connection-mark=no-mark new-connection-mark=first out-interface=ether1 passthrough=yes add action=mark-connection chain=forward connection-mark=no-mark new-connection-mark=other out-interface=ether2 passthrough=yes
Instead of masquerade, we will use src-nat for our local networks, because we do not want to purge connections which is one of masquarades main features when a primary link fails. We will restrict them with a firewall rules (later in this example)
/ip firewall nat add action=src-nat chain=srcnat out-interface=ether1 to-address=10.1.101.18/24 add action=src-nat chain=srcnat out-interface=ether2 to-address=10.1.200.18/24
When the primary link will fail, we will reject all the established connections, so a new connections will pass through the secondary link. The same behavior will happen when a primary link will come back again and here we will prevent local IP leakage to a public network, which is one of.
add action=reject chain=forward connection-mark=other out-interface=ether1 reject-with=icmp-network-unreachable add action=reject chain=forward connection-mark=first out-interface=ether2 reject-with=icmp-network-unreachable
We will add two default routes. With
distance parameter we set route preference:
/ip route add gateway=10.1.101.1 distance=1 check-gateway=ping /ip route add gateway=10.1.200.1 distance=2