Difference between revisions of "Manual:Fast Path"

From MikroTik Wiki
Jump to navigation Jump to search
(Created page with "{{Versions|v6+}} __TOC__ ==Summary== {{cont}} PoE PoE PoE PoE [[Category:Case Studi...")
 
Line 5: Line 5:
==Summary==
==Summary==


==List of RouterBoards with FastPath support==
==FastPath Handlers==
Currently RouterOS has three fast path handlers
* ipv4 fast path
* traffic generator
* mpls fast path
IPv4 fast path is automatically used if following conditions are met:
* [[firewal rules]] are not configured,
* [[simple queues]] are not configured
* source interface is not [[bridge]] or [[bonding]] slave
* destination interface have configured [[only-hw-queue]],
* no [[vrrp]], [[mesh]], [[metarouter]] interface configuration,
* [[sniffer]], [[torch]] or [[traffic generator]] is not running
* connection tracking is disabled
<code>/ip firewall connection tracking set enabled</code> parameter has new <var>auto</var> value Which means that connection tracking is disabled by default until firewall rules are added.
Packet will be forwarded in fast path only if source and destination interfaces support fast path.


{{cont}}
{{cont}}

Revision as of 09:29, 8 October 2012

Version.png

Applies to RouterOS: v6+

Summary

List of RouterBoards with FastPath support

FastPath Handlers

Currently RouterOS has three fast path handlers

  • ipv4 fast path
  • traffic generator
  • mpls fast path


IPv4 fast path is automatically used if following conditions are met:

/ip firewall connection tracking set enabled parameter has new auto value Which means that connection tracking is disabled by default until firewall rules are added.


Packet will be forwarded in fast path only if source and destination interfaces support fast path.

[ Top | Back to Content ]