Manual:IP/SSH: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
(toc)
(→‎Settings: always-allow-password-login)
Line 13: Line 13:
|style="border-bottom:1px solid gray;" valign="top"|'''forwarding-enabled''' ''(no|yes default:no)''
|style="border-bottom:1px solid gray;" valign="top"|'''forwarding-enabled''' ''(no|yes default:no)''
|style="border-bottom:1px solid gray;" valign="top"|controls ssh port forwarding
|style="border-bottom:1px solid gray;" valign="top"|controls ssh port forwarding
|-
|style="border-bottom:1px solid gray;" valign="top"|'''always-allow-password-login''' ''(no|yes default:no)''
|style="border-bottom:1px solid gray;" valign="top"|controls ssh authentication methods, if set to yes, does not remove form allowed methods password_login
|}
|}



Revision as of 11:12, 15 November 2012

Version.png

Applies to RouterOS: v5

Summary

This menu controls if ssh port forwarding is/is not allowed on the router. Enabling this feature remote hosts are able to create ssl encrypted connection from remote host to router port.

Settings

Property Desciption
forwarding-enabled (no|yes default:no) controls ssh port forwarding
always-allow-password-login (no|yes default:no) controls ssh authentication methods, if set to yes, does not remove form allowed methods password_login

Example

To use this feature from Linux host using OpenSSH client this command can be used:

 ssh reamoteuser@remotehost -L port:remotehost:remoteport

where:

  • remoteuser - user of router
  • remotehost - router address (if host name is used in -L settings, router should be able to resolve this name)
  • port - local port that your host will listen on
  • remoteport - port on the router

If user requires telnet to router, but you do not want to allow it to be plain text, Following can be done:

ssh admin@192.168.88.1 -L 3000:192.168.88.1:23

now when user uses telnet localhost 3000" it will log in the router using telnet over encrypted tcp connection.

Icon-note.png

Note: we fully support SFTP v3 as described in draft-ietf-secsh-filexfer-02.txt other versions can cause problems