Difference between revisions of "Manual:IP/TFTP"

From MikroTik Wiki
Jump to: navigation, search
Line 1: Line 1:
RouterOS has a built-in TFTP server since v3.22
+
TFTP is a very simple protocol used to transfer files.  It is from this that its name comes, Trivial File Transfer Protocol or TFTP.  Each nonterminal packet is acknowledged separately. RouterOS has a built-in TFTP server since v3.22
  
 
* '''ip-address''' ''(required)'' - range of IP addresses accepted as clients
 
* '''ip-address''' ''(required)'' - range of IP addresses accepted as clients

Revision as of 13:17, 3 April 2009

TFTP is a very simple protocol used to transfer files. It is from this that its name comes, Trivial File Transfer Protocol or TFTP. Each nonterminal packet is acknowledged separately. RouterOS has a built-in TFTP server since v3.22

  • ip-address (required) - range of IP addresses accepted as clients
  • req-filename - requested filename as regular expression (regex)
  • real-filename - if above two values are set and valid, the requested filename will be replaced with this. If this field is empty, the req-filename will be used. If multiple regex are specified in req-filename, with this field you can set which ones should match, so this rule is validated. real-filename format for using multiple regex is filename\0\5\6
  • allow (default: yes) - to allow connection if above fields are set. if no, connection will be interrupted
  • read-only (default: no) - sets if file can be written to, if set to "no" write attempt will fail with error
  • hits - how many times this configuration entry has been executed (viewable only)

2009-04-03 1314.png