Manual:IP/TFTP: Difference between revisions

From MikroTik Wiki
Jump to navigation Jump to search
(examples)
Line 15: Line 15:


* if ''file'' is requested return file from store called ''sata1'':
* if ''file'' is requested return file from store called ''sata1'':
 
<pre><nowiki>
/ip tftp add req-filename=file.txt real-filename=/sata1/file.txt allow=yes read-only=yes
/ip tftp add req-filename=file.txt real-filename=/sata1/file.txt allow=yes read-only=yes
 
</nowiki></pre>
* if we want to give out one precise ''file'' no matter what user is requesting:
* if we want to give out one precise ''file'' no matter what user is requesting:
 
<pre><nowiki>
/ip tftp add req-filename=* real-filename=/sata1/file.txt allow=yes read-only=yes
/ip tftp add req-filename=* real-filename=/sata1/file.txt allow=yes read-only=yes
</nowiki></pre>

Revision as of 13:05, 3 April 2009

TFTP is a very simple protocol used to transfer files. It is from this that its name comes, Trivial File Transfer Protocol or TFTP. Each nonterminal packet is acknowledged separately. RouterOS has a built-in TFTP server since v3.22

  • ip-address (required) - range of IP addresses accepted as clients
  • req-filename - requested filename as regular expression (regex)
  • real-filename - if above two values are set and valid, the requested filename will be replaced with this. If this field is empty, the req-filename will be used. If multiple regex are specified in req-filename, with this field you can set which ones should match, so this rule is validated. real-filename format for using multiple regex is filename\0\5\6
  • allow (default: yes) - to allow connection if above fields are set. if no, connection will be interrupted
  • read-only (default: no) - sets if file can be written to, if set to "no" write attempt will fail with error
  • hits - how many times this configuration entry has been executed (viewable only)

2009-04-03 1314.png


Examples

  • if file is requested return file from store called sata1:
/ip tftp add req-filename=file.txt real-filename=/sata1/file.txt allow=yes read-only=yes
  • if we want to give out one precise file no matter what user is requesting:
/ip tftp add req-filename=* real-filename=/sata1/file.txt allow=yes read-only=yes